Samsung UA22ES5000J User Manual

E-MANUALThank you for purchasing this Samsung product.To receive more complete service, please register your product atwww.samsung.com/registerModel__

(MHL) port only. ●The MHL function allows to display mobile device's screen via the HDMI IN 3 (MHL) port. It can be enabled only when the TV is c

HDMI-DVI cable, you can only make changes to White Balance and Gamma. ●ℓ∫Dynamic ContrastAdjusts the screen contrast. ●ℓ∫Black ToneDarker settings mak

●ℓ∫RGB Only ModeDisplays the Red, Green and Blue colours so you can make fine adjustments to hue and saturation. ●ℓ∫Colour SpaceAdjusts the range and

●ℓ∫White BalanceAdjusts the colour temperature of the picture so that white objects look white (instead of, for example, slightly pink or slightly ye

Reset: Resets the White Balance to its default settings. ●ℓ∫10p White BalanceLets you control the white balance by adjusting the red, green, and blue

Interval: Select the interval to adjust.Red: Adjusts the red level.Green: Adjusts the green level.Blue: Adjusts the blue level.Reset: Resets the 10p W

disappears or a menu other than the Picture menu is opened, the TV saves the calibration and the Expert Pattern screen disappears.Off: Turns the Exper

colours. NAfter selecting Pattern1 or Pattern2, you can adjust any of the advanced settings for the desired effect. NWhile the Expert Pattern is runni

when you are watching movies input from an external device (e.g. BD/DVD player) connected to the TV’s HDMI or Component IN jacks. NAvailable only when

adjusts the brightness of the screen in response to the brightness of the room. In bright light, the screen brightens. In dim light, the screen dims.

∫ℓPicture OptionsMenu → Picture → Picture OptionsUsing this function, you can configure additional picture settings to suit your preference. NWhen con

Using a Component (up to 1080p)The displayed image may differ depending on the model.Using a Component (up to 1080p) or an Audio/Video (480i only) NWh

when the Picture Mode is set to Dynamic. NYou can adjust and store settings for each external device connected to an input on the TV. Select Source an

screen.Auto Visualisation: When changing analogue channels, displays signal strength. NWhen the signal is weak, try all the options until the TV displ

Reduces MPEG noise to provide improved picture quality. ●ℓ∫HDMI Black LevelLets you adjust the screen depth by selecting a black level. NAvailable onl

NAvailable in TV, AV, Component (480i/576i/1080i) and HDMI (1080i). ●ℓMotion PlusRemoves drag from fast scenes with a lot of movement to provide a cl

Motion Plus function. NIf noise occurs on the screen, please set Motion Plus to Off. If Motion Plus is set to Custom, you can control Blur Reduction a

reduction level from video sources.Judder Reduction: Adjusts the judder reduction level from video sources when playing films.Reset: Reset the custom

∫ℓReset PictureMenu → Picture → Reset PictureResets your current picture mode to its default settings.

Using the TV with Your PCUsing Your TV as a Computer (PC) DisplayEntering the Video Settings (Based on Windows 7)For your TV to work properly as a com

Windows and your video card, the procedure on your PC will probably differ slightly from the procedure presented here. NHowever, the same basic inform

in the “Control Panel” window. A display dialog box appears.3. Click “Display”. Another display dialog box appears.4. Click the “Settings” tab on the

the AV connector (yellow) to the TV jack (Green). NTo obtain the better picture quality, the Component connection or Scart connection are recommended

exists on your display settings dialog box, select “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.

Changing the Preset Sound Mode∫ℓSound ModeMenu → Sound → Sound ModeSound mode is applied to preset adjustments to the sound. NIf Speaker Select is set

Emphasizes music over voices. ●MovieProvides the best sound for movies. ●Clear VoiceProvides the best sound for movies. ●AmplifyIncrease the intensity

Adjusting Sound Settings∫ℓSound EffectMenu → Sound → Sound Effect NIf Speaker Select is set to External Speaker, Sound Effect is disabled. NAvailable

through a pair of speakers using HRTF (Head Related Transfer Function) technology. ●ℓ∫Dialog ClarityThis function allows you to increase the intensity

a slider, and then change the slider’s value. To Reset the Equaliser, select Reset. A pop-up appears asking if you want to reset. Select Yes. To exit,

Reset: Resets the equalizer to its default settings.ℓ∫3D AudioMenu → Sound → 3D Audio3D audio technology provides the immersive sound corresponding to

∫ℓBroadcast Audio OptionsMenu → Sound → Broadcast Audio Options ●ℓAudio Language(Digital channels only)Change the default value for audio languages.

When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main

●ℓAudio Description(Not available in all locations) (Digital channels only)This function handles the Audio Stream for the AD (Audio Description) whic

Connecting to an Audio deviceUsing an Optical (Digital) ConnectionThe displayed image may differ depending on the model.

volume.ℓAdditional Settings ●ℓ∫DTV Audio Level(Digital channels only)This function allows you to reduce the disparity of a voice signal (which is one

adjusted between -10dB and 0dB. NTo increase or decrease the volume, adjust between the range 0 and -10 respectively. ●ℓ∫SPDIF OutputSPDIF (Sony Phili

Digital Audio output (SPDIF) format. NThe available Digital Audio output (SPDIF) format may differ depending on the input source ℓ∫Audio Delay: Correc

between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). NSelect Line to obtain dynamic sound, and RF to reduce the dif

greater or less than -20dB (reference) to either -10dB or -20dB.∫ℓSpeaker SettingsMenu → Sound → Speaker Settings ●ℓ∫Speaker SelectIf you are listenin

speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External Speaker. NWhen Speaker Select is set to External Spe

NWhen the Speaker Select is set to External Speaker, the volume buttons and mute functions will not operate and the sound settings will be limited. N

channel.Night: Automatically equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night, when you m

source device may have an effect.∫ℓReset SoundMenu → Sound → Reset SoundReset all sound settings to the factory defaults.

Connecting to the Network∫ℓThe Wired Network ConnectionThere are three ways to attach your TV to your LAN using cable: NFor illustrations of the three

DIGITAL AUDIO OUT (OPTICAL) ●When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and

modem using a LAN cable. –You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a router which is connected to an ex

is attached to a modem or router elsewhere in your house. NIf your network requires a Dynamic IP address, you should use an ADSL modem or router that

do not have to enter them manually. Most home networks use a Dynamic IP address. NSome networks require a Static IP address. If your network requires

your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer. NYou can use ADSL modems th

NFor an illustration of the wireless network connection, see your paper user's manual.You can connect your TV to your LAN through a standard wir

play smoothly. NTo use a wireless network, your TV must be connected to a wireless router or modem. If the wireless router or modem supports DHCP, you

wireless router or modem is currently being used by another device nearby, this will result in interference and communication failure. NYour TV suppor

mode and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP (access point) or wireless router, Samsung TVs will not support a

Configuration) or a PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. NIf your router, modem

Network Search function) –Using Manual Setup –Using WPS(PBC) –Using Plug & Access

is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray

Setting up a Wired Network∫Network SettingsMenu → Network → Network SettingsSet up the wired or wireless network connection so you can use various Int

You can configure your TV's wired network connection automatically when connecting your TV to a network that supports DHCP. NIf you have connecte

1. Go to the Network Settings screen. (Menu → Network → Network Settings)2. Select Start. The network test screen appears and verifies the network con

provider." message appears. Select OK. NIf the connection process fails, check the LAN port connection. NIf the automatic process cannot find the

You can configure your TV's wired network connection manually when connecting your TV to a network that requires a Static IP address.Getting the

2. In the pop-up menu that appears, click Status.3. On the dialog that appears, click the Support tab.4. On the Support Tab, click the Details button.

1. Go to the Network Settings screen. (Menu → Network → Network Settings)2. Select Start. The network connection screen appears and the verification p

IP Mode to Manual.5. Go to the IP Address entry field, and then select the IP Address using the remote.6. Enter the first portion of the IP Address (f

8. Repeat the entry process for each field in the IP Address. NIf you make a mistake when entering a number, re-enter the number to correct it.9. When

test screen appears and the verification process starts. When the connection has been verified, the "You are connected to the Internet. If you ha

satellite receiver directly to an amplifier or home theatre.Headphones HThe displayed image may differ depending on the model.You can connect your hea

Internet status.If the wired network connection failed... ●∫∫No network cable found.Check if your network cable is plugged in. If it is connected, mak

manually by selecting IP Settings.1) Ensure that DHCP server is enabled on the router.2) Unplug and re-plug-in the router. 3) Contact your Internet Se

●∫Connected to your local network, but cannot connect to the Internet.Check the DNS settings in IP Settings or contact your Internet Service Provider

Setting up the Wireless Network∫Network SettingsMenu → Network → Network SettingsSet up the wired or wireless network connection so you can use variou

Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an

the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the automatic or manual setup

steps:1. Go to the Network Settings screen. (Menu → Network → Network Settings)2. Select Start. The network function searches for available wireless n

NIf the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Name (SSID) and Security Key to es

Security Key (Security key or PIN). NWhen you enter the Security Key (Security key or PIN), using your remote. NYou should be able to find the Pass Ph

∫7. When the connection has been verified, the “You are connected to the Internet. If you have any problems using online services, please contact your

the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled. ●Sound function may be r

manually, select IP Settings. Then, go to the next section, “Manual Network Setup”.ℓ∫Manual Wireless Network SetupYou can configure your TV's wir

Getting the Network Connection ValuesTo view the Network connection values on most Windows computers, follow these steps:1. Right click the Network ic

4. On the Support Tab, click the Details button. The Network connection values are displayed.To set up your TV's wireless network connection manu

searches for available wireless networks. When done, it displays a list of the available networks.∫3. In the list of networks, select a network you wa

connection.4. If the Enter security key screen appears, go to step 5. If you selected a wireless router that does not have security, go to step 7.5. E

screens you used to set up your router or modem.6. When done, select Next. The network connection screen appears and the verification process starts.∫

9. Go to the IP Address entry field, and then select the IP Address using the remote.10. Enter the first portion of the IP Address (for example, 105)

field in the IP Address. NIf you make a mistake when entering a number, re-enter the number to correct it.13. When done, go to the Subnet Mask fields.

verification process starts. When the connection has been verified, the "You are connected to the Internet. If you have any problems using online

WPS(PBC) button quickly and easily.To set up your TV's wireless network connection using WPS(PBC), follow these steps:1. Go to Network Settings s

type.

list of the available networks.3. Select the WPS(PBC).4. Press the WPS(PBC) button on your router within two minutes. Your TV automatically acquires a

The Plug & Access function lets you easily connect your Samsung TV to your Samsung wireless router (sold separately) by using a USB memory stick t

in all regions can be bought. NYou can check for equipment that supports Plug & Access on www.samsung.com.To set up your TV's wireless networ

USB port in your Samsung wireless router. Check the router’s LED’s to make sure it is on (Blinking → on).3. Take the USB memory stick out of the route

your TV to your wireless router, a popup screen appears on the screen notifying you of the failure. If you want to try using Plug & Access again,

done. NIf the wireless router’s settings change or you install a new wireless router, you must perform the Plug & Access procedure again, beginnin

You can connect a Samsung wireless router to many devices, such as laptops, mobile phones, BD players etc. But, when you connect a Samsung TV to a Sam

•Priority QOS makes your TV faster by giving it priority bandwidth. (Priority QOS is optional. You can turn it on and off.) •Because your Samsung TV

∫Network StatusYou can check the current network and Internet status.If the wireless network connection failed... ●∫∫Wireless network connection faile

off and on again. Check if you need to enter a security key to use the router. ●∫IP auto setting failed.Try the following to set your IP address autom

Connecting to a PCUsing an HDMI cable or an HDMI to DVI cableThe displayed image may differ depending on the model. NConnecting through the HDMI cable

●∫Unable to connect to the network.Try the following: check if your IP address is set correctly in IP Settings. Contact your Internet Service Provide

connect to the Internet.Contact your Internet Service Provider to access the Internet.

Managing the Network Devicesℓ∫Wi-Fi DirectMenu → Network → Wi-Fi DirectSet to connect the TV to wireless mobile devices. Using this function, you can

these steps:1. Go to the Wi-Fi Direct screen (Network → Wi-Fi Direct). The TV starts to search devices, and then displays the devices on the Wi-Fi Dir

within 2 minutes. The Connecting popup appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct

Connecting popup appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as Disconnecte

cannot connect to another TV or BD through Wi-Fi Direct.ℓ∫Soft APMenu → Network → Soft APUsing this function, you can connect the TV to your mobile de

●Soft APTurns Soft AP on or off. When Soft AP is set to On, your mobile devices can find the TV's network name in their Wi-Fi connection list. ●

available. –To connect a mobile device to the TV, you must input the security key into the device. –If network does not operate correctly, check the s

(For only some of the mobile device models among the mobile device models supporting Wi-Fi Direct or Soft AP.)Wi-Fi Direct Soft APNumber of Wi-Fi devi

Connection and Channel Menu• ConnectingtheTV 1• UsingtheINFObutton(Now&Nextguide)19• ManagingChannelsandChannelFunctions21• Me

may not be supported depending on the PC.Optimal resolution is 1920 X 1080 @ 60 Hz. NFor HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) ja

your DLNA compatible device on the TV using a network connection. It also lets you control the TV through these devices.The AllShare Settings screen l

displays devices if you have established networked connections to AllShare devices. Otherwise, it will be empty.To use the AllShare network function,

Enter a name for this TV. This name will be shown on network remote controls and devices using AllShare Play. NA keyboard appears on the screen. Key i

Setting the Time∫ℓTimeMenu → System → Time NThe current time will appear every time you select Information using your remote. ●ℓ∫ClockSet the clock to

you have to set the clock again.Clock Mode: Set the current time manually or automatically. –Auto: The TV sets the current time automatically using th

set up may not be correct. In this case, set the time manually. –Manual: Set the current time manually.Clock Set: Set the Date and Time manually. You

the Clock Mode is set to Auto. ●ℓ∫Sleep TimerAutomatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150, or 180 minutes). NSe

of your choosing. You can set up three separate On Timer configurations. (On Timer 1, On Timer 2, On Timer 3) NYou must set the clock before you can u

selected.Time: Set the time that the TV turns on automatically.Volume: Set the desired volume level. Change the volume level using your remote.Source:

external device connected to the TV. NThe USB device must be connected to your TV before you can select USB.Aerial (when the Source is set to TV): Sel

●Separate and Composite modes are supported. SOG (Sync On Green) is not supported. ●PC (D-Sub) input is not supported.

you want played when the TV turns on automatically. NIf there is no music file on the USB device or you don’t select a folder containing a music file,

own folder. When using more than one of the same types of USB, make sure the folders assigned to each USB have different names. NWe recommend that yo

TV can take too long to recognize these devices. NIf you set the On Timer to play a file saved on a USB HDD, it may take up to 40 seconds or more to p

Timer 1, Off Timer 2, Off Timer 3) NYou must set the clock before you can use the Off Timer.Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~S

automatically.

Blocking Programmes∫ℓSecurityMenu → System → SecurityUsing this function, you can configure programme related security options. Every time you access

●ℓChannel LockLock channels in Channel menu, to prevent unauthorized users, such as children, from watching unsuitable programme. NAvailable only whe

enter the same 4 digits in the Confirm New PIN. When the Confirm screen disappears, select Close. The TV has memorised your new PIN.

Economical Solutions∫ℓEco SolutionMenu → System → Eco Solution ●ℓ∫Energy SavingLets you adjusts the brightness of the TV in order to reduce power cons

screen. ●ℓ∫Eco SensorTo enhance your power savings, the picture settings will automatically adapt to the light in the room. NIf you adjust Backlight i

Using the INFO button (Now & Next guide)The display identifies the current channel and the status of certain audio-video settings.The Now & Ne

NIf the Eco Sensor is set to On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity.

receiving a signal. NDisabled when an attached PC is in power saving mode. ●ℓ∫Auto Power OffThe TV will automatically turn off if you don’t press a bu

Picture In Picture (PIP)∫ℓPIPMenu → System → PIPYou can watch a programme whose signal has passed through the TV’s tuner and watch video from one exte

cable box and a movie from a Blu-ray player attached to the HDMI In jack. NWhile Smart Hub is on, you cannot use the PIP. ●PIPActivate or deactivate t

screen. ●SizeSelect a size for the sub-picture screen. ●PositionSelect a position for the sub-picture screen. NIn Double (à, Œ) mode, you cannot selec

picture. NIf you turn the TV off while watching in the PIP mode, the PIP function is reset to Off. When you turn your TV on, you must turn PIP on agai

function is active. NPIP Settings: The picture from the external video source will be in the main screen and the picture from the TV’s tuner will be i

Using the TV with a Keyboard and a Mouseℓ∫Device ManagerMenu → System → Device ManagerUsing this function, you can set up a keyboard or mouse to use w

compatible with your TV. ●ℓ∫Keyboard settingsLets you use a USB or Bluetooth keyboard with your TV. If you want to use a USB keyboard, connect it to t

∫Select keyboardSelect which keyboard to use from your keyboard list. You can only use one keyboard at a time, even if several are connected.Add Bluet

●Scroll u, d to view information for other channels. If you want to move to the currently selected channel, select E using your remote.

for your keyboard. –Keyboard type: Set what a type of keyboard you're using to enter text. –Switch Input Language: Select a key sequence to chang

connect it using the Bluetooth function.You can use a mouse in the TV's menu in the same way you use a mouse on your PC. ∫Select mouseSelect whic

∫Mouse OptionsSets the default options for the mouse buttons. –Primary Button: Select the main button you want to use to click and select on screen. –

Using the TV's menu with a mouse1. Connect a USB or Bluetooth mouse on your TV.2. Click a primary button you selected. The Go To pop-up appears.3

NTo exit an entry field that does not close, click R Return. NTo exit a menu or Smart Hub screen, click R Return. NTo hide the mouse pointer, move it

Other Features∫ℓLanguageMenu → System → Language ●∫ℓMenu LanguageSet the menu language. ●ℓPreferred LanguageSelect a language, which will be the defau

ℓSubtitle(On-Screen Text Messages)Menu → System → SubtitleUse this menu to set the Subtitle mode. ●SubtitleSwitches subtitles on or off. ●ℓSubtitle Mo

watching does not support the Hearing Impaired function, Normal automatically activates even if the Hearing Impaired mode is selected. NEnglish is the

TV activates the screen saver to prevent the formation of burnt in ghost images on the screen.∫ℓGeneralMenu → System → General ●ℓ∫Game ModeWhen you ha

set the Game Mode on.Precautions and limitations for Game Mode –Before disconnecting a game console and connecting another external device, set Game M

Managing Channels and Channel FunctionsPress the ™ button to select the menu you want to use. Each screen will be displayed.ℓ∫Guide™ → GuideThe EPG (E

NSet Game Mode to On only after connecting a game console. If you turn Game Mode on before you have attached the game console, you may notice reduced

Theatre products which support BD Wise. When the BD Wise is set to On, the picture mode is automatically changed to the optimal resolution. NAvailable

Your TV gives sound feedback when you use TV. Sound Feedback is enabled by default. Turn off Sound Feedback or adjust its volume. ●ℓ∫Panel LockLock or

●Light EffectYou can turn the LED on/off on the front of TV. Turn it off to save power or if the LED is too bright for you. NSet the Light Effect to

Menu → System → Anynet+ (HDMI-CEC)Allows you to control all connected Samsung devices that support anynet+ with your Samsung TV’s remote.For details o

Shows the registration code authorized for the TV. If you connect to the DivX web site and register with 10-digit registration code, you can download

Support Menuℓ∫e-ManualMenu → Support → e-ManualThe e-Manual is built into your TV. Open the e-Manual to learn how to use your TV are many features. NF

∫ℓSelf DiagnosisMenu → Support → Self Diagnosis ●ℓ∫Picture TestUse to check for picture problems. Picture Test displays a high definition picture that

may be a problem with the TV. Contact Samsung’s Call Centre for assistance.No: Select No if the test picture displays properly. There may be a problem

NIf you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu, and

programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme e

from only one speaker or from neither speaker during the sound test. There may be a problem with the TV. Contact Samsung’s Call Centre for assistance.

(Digital channels only)The reception quality of over-the-air HD channels is either perfect or the channels are unavailable. Signal Information display

ℓTo reset your TV to its default settings, follow these steps:1. Go to the Reset menu. (Support → Self Diagnosis → Reset)2. The PIN input screen appea

factory defaults." appears.4. Select Yes. All settings are reset. The TV will turn off and on again automatically. The Setup screen appears. For

∫ℓSoftware UpdateMenu → Support → Software UpdateThe Software Update menu lets you upgrade your TV’s software to the latest version.Current Version: T

–Online –By Channel for Hongkong models –Alternative Software –Standby Mode UpgradeThe five methods are explained in the following pages. NBe caref

software, all video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can

2. Download the latest USB software upgrade exe archive to your computer.3. Extracts the exe archive to your computer. You should have a single folder

6. In the TV’s menu, go to Support → Software Update.7. Select the By USB. NPlease be careful not to remove the USB drive until the upgrade is complet

Online, you must have configured your TV to connect to your network and the TV must be connected to the Internet. See the "Setting up the Network

●b (-24 Hours): Viewing the list of programmes to be broadcasted before 24 hours. ●{ (+24 Hours): Viewing the list of programmes to be broadcasted af

the Download popup appears with a progress bar and the download starts.3. When the download is complete, the Upgrade Query screen appears with three c

in one minute or select Upgrade Later, the TV stores the new upgrade software. You can upgrade the software later using the Alternative Software funct

the software transmission period, software will be automatically searched and downloaded. NThe time required to download the software is determined by

downloaded by the TV in Standby Mode (See Standby Mode Upgrade in the next section).To upgrade using Alternative Software, follow these steps:1. If up

3. The TV displays a message asking if you want to upgrade. Select Yes. The TV begins the upgrade.4. When the upgrade is complete, the TV turns off au

In Standby mode, the TV is off, but its Internet connection is active. This allows the TV to download upgrade software automatically, when you are not

these steps:1. Select the Standby Mode Upgrade.2. Select Off, 1 hour later, 2 hours later, 0:00, 2:00, 12:00 or 14:00. –Off: If you select Off, the TV

download new upgrade software when it is in Standby mode with the power off.If downloaded new software, it will pop up a message which enquiries wethe

∫ℓContact SamsungMenu → Support → Contact SamsungView this information when your TV does not work properly or when you want to upgrade the software. Y

The Call Center will access your Samsung Product remotely to check internal information. Remote Management can control user settings and troubleshoot

●k Page: Move to next or previous page. ●E Watch / Schedule: When selecting the current programme, you can watch the selected programme. / When selec

at www.samsung.com under Contact support.Smart HubMenu → Support → Smart HubSmart Hub lets you connect to the Internet and enjoy a variety of Internet

Using the 3D functionℓ∫3DMenu → Picture → 3DThis exciting new feature enables you to view 3D content. To fully enjoy this feature, you must need a pai

INFORMATION FOR 3D PICTURES.Read and understand the following safety information before using the TV’s 3D function. [Warning Some viewers may experie

period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV; remove your 3D Active Glasses and rest. A responsible adult should f

for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.) Do not use the 3D function or 3D Active Glasses while walking o

Select the 3D input format. NIf you want to experience the 3D effect fully, put the 3D Active Glasses on first, and then select the 3D Mode from the l

: Displays the images for the left and right eye alternately in rows.: Displays the images for the left and right eye alternately in columns.: Display

. NThe and are available when the resolution is 720p, 1080i and 1080p in DTV, HDMI, and USB mode or when your PC is connected through an HDMI/DVI

1920 x 1080. ●ℓ3D EffectAdjust 3D effects like perspective and depth for your preferred 3D viewing experience. –Auto: Automatically adjust the perspec

Adjusts the overall 3D perspective of on-screen image. ●ℓDepthAdjusts the overall depth. ●ℓ∫L/R ChangeSwaps the left and right pictures. ●ℓ3D Auto Vie

channels from the different Category channel lists on the Channel screen, set favourite channels, view and access recently viewed and most viewed chan

View to Message Alert, a pop up message window appears when the TV receives a 3D signal. Then you can view a 3D image by selecting 3D using your remot

1280 X 720p, 1920 X 1080i, or 1920 X 1080p. NWhen you run some applications (such as Smart Hub, etc.), TV will not switch to 3D. To switch to 3D, you

Resolution Frequency (Hz)1280 x 720p 25 / 50 Hz1920 x 1080i 25 / 50 Hz1920 x 1080p 25 / 50 HzResolution supported for HDMI PC modeThe optimal resoluti

ℓHow to watch the 3D imagesSome 3D modes may not be available depending on the format of the image source.To watch in 3D, you must wear 3D Active Glas

3. Select the 3D Mode option for the image you want to view. The screen goes blank for a moment, and then reappears in the 3D mode you selected.Suppor

by 3D TVs.Source signal format Standard HDMI 1.4 3D1920x1080p @ 24Hz x 2 1920x2205p @ 24 Hz1280x720p @ 50 / 60Hz x 2 1280x1470p @ 50 / 60 HzFor the St

●Judder Reduction Display Mode: When Motion Plus is set to Smooth or Custom, you can watch a smooth picture without judder.Read These Notes Before Us

in 3D mode. PIP is not supported in 3D mode. 3D Active Glasses from Samsung’s previous IR type 3D products and 3D glass from other manufacturers are

product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic device as far away as possible from the 3

three times or more the height of the screen. For example, if your screen is two feet high, you should sit at least six feet from the screen. We recom

Channel screen) ●AllShows all channels. ●TVShows TV channels. ●RadioShows radio channels. ●Data/OtherShows data channels and other channels. ●Analogue

ℓ∫Smart HubMenu → Support → Smart Hub(May not be available,depending on your country.)Using this function, you can stream movies, videos, and music fr

quotes, maps, photos, and games. NYou can also start this function by pressing the ™ button on the remote control.Notice Samsung Electronics takes no

in English only and the contents available may vary, depending on your area. For more information about a Smart Hub service, visit the web site of th

the service may be delayed or interrupted. Furthermore, the player may turn off automatically in response to conditions on the Internet. If this occur

firmware version. For pay DivX contents with copy protection can only be played through a composite, a component or an HDMI cable. If the TV display

and Motion Control → Motion Control): An USB or Bluetooth Mouse (the device must connected to the TV). (System → Device Manager →Mouse Settings)ℓTo st

a few cases, the Country screen appears immediately after.3. If the Country screen has appeared, select your country using your remote. NSome applicat

5. The Privacy policy screen appears. Select Agree.6. The Service Update screen appears and installs a number of services and applications. When done,

NA number of screens may appear after installation. You can close them or let them close on their own.7. To start an application, select an applicati

to lower case, capitalized case, upper case, numbers and icons. You can use this Screen Keypad in a several Smart Hub applications.Method 1: Using the

•∫CustomizingtheHomeScreen 310•∫UsingtheSamsung Apps 340•ℓ∫Search 350•∫ℓYour Video 356•∫ℓFamily Story 373•∫ℓFitness 428•ℓ∫Kids 440•

Shows analogue channels. ●ℓFavourites 1 – Favourites 5Lets you arrange and display favourite channels in up to five groups. Each group is independent

case to numbers.3. Select 1, 0 and 5 in numerical order.4. Select — 3 times using your remote to change the input mode from numbers to upper case.5. S

remote in the same way. When done, select OK.Method 2: Using the Keypad of XT9 type.1. For example, suppose that you want to input “105Chang”2. Select

4. Select — 3 times using your remote to change the input mode from numbers to capitalized case.5. Select in sequence: 2, 4, 2, 6, 4. A window will ap

dictionary. Add your own word to your dictionary.ℓUsing the QWERTY KeypadYou can use this Screen Keypad in a several Smart Hub applications in same wa

Delete all inputted character. ●b Numeric / QWERTYToggles the keypad mode between Numeric mode and QWERTY mode. NWhen the keypad is set to QWERTY mode

Input Language: Select a input language.XT9 text input: Turns on or off the recommended word function. ●E EnterEnter the selected character. ●R Return

screen is icon mode. ●µ Next PageMove to the next keypad. NAvailable only when the keypad screen is icon mode.ℓCreating an AccountTo establish your ow

an ID. NYou can register up to 10 User Accounts. NYou do not need an account to use the Smart Hub.To create an account, follow these steps:1. On the S

NWhen using the Smart Touch Control, press the ReturnR button to close the button screen and use the button.2. Select Create Account using your remot

5. When done, select OK. The Login screen reappears.6. Select Password. The Password screen and a keypad appear.7. Use the keypad to enter a password.

NIf the highlight located in the Favourites 1 – Favourites 5 category, you can change the name of category by selecting b using your remote. ●Recentl

8. When done, select OK.9. Select Confirm Password. The Password screen and a keypad re-appear.10. Repeat Steps 7 and 8.11. When done, select Create A

accounts or do not want to register existing accounts at this time, select Cancel. You can also let the window close on its own in about a minute.14.

account account. Registration makes it easier to access the provider’s web site. For registration instructions, go to Step 2 in Account Manager under

∫Customizing the Home Screen ●a ℓ∫Login / LogoutTo log in to your Samsung account, follow these steps:1. With the Smart Hub main screen displayed on y

NIf you want to input the Samsung account. The screen keypad will appear. Then you can input your Samsung account manually. NWhen you select Face Rec

section in the e-Manual.3. Select your ID from the list that appears. The Login screen re-appears.4. Select Password. The Password window and a keypad

you have entered your password. A c mark appears. The Smart Hub will now enter your password automatically when you select or enter your ID. NIf you w

password. Select b using your remote. A pop-up message appears, and then select OK. The guide to resetting your password will be sent to your e-mail.

Samsung Account, and register or reset your face recognition. For more information about Account Manager, refer to "Configuring the Smart Hub wit

Account. ●WallpaperYou can change a background image the Smart Hub home screen. ●ℓMoveThe Move function lets you change the screen position of an appl

Using the coloured and function buttons with Channel ●a Air / CableSelect the desired aerial source. The option may differ depending on country. ●b De

1. Select an application or a folder, and then open the Tools menu using your remote.2. Select the Move. A position change screen appears.3. Move the

The Move to Folder function lets you move an application to a folder.To use the Move to Folder function, follow these steps:1. Select an application,

and then closes. The application has been moved to the folder. NAlso, if you select an application in a folder, the application can be moved to the Sm

starts. ●ℓDeleteThe Delete function lets you delete application from the Smart Hub.To use the Delete function, follow these steps:1. Select an applica

item(s)? appears.3. Select OK. The application is deleted. ●ℓNew FolderThe New Folder function lets you create and name new folders. Once you have cre

remote.2. Select the New Folder. The New Folder window and a keypad screen appear.3. Enter the name of the folder using your remote.4. When done, sele

The Rename Folder function lets you rename folders.To use the Rename Folder function, follow these steps:1. Select a folder, and then open the Tools m

4. When done, select OK. The Rename Folder window closes and the new name appears below the folder. ●ℓLockThe Lock function lets you lock some applica

To use the Lock function, follow these steps:1. Select an application, and then open the Tools menu using your remote.2. Select Lock. The Security win

NDepending on the application, this function may not be supported.To use the Unlock function, follow these steps:1. Select an application, and then o

Displays details of the selected channel. ●k PageScrolls the channel list to the next or previous page. NThese correspond to the CH buttons on the rem

appears. A lock symbol disappears. ●InformationYou can view the detailed information about the selected application. NDepending on the application, yo

to Account Manager, Service Manager, Reset and About Smart Hub functions.To access the Settings menu, and then select a menu item, follow these steps:

●ℓAccount ManagerThe Account Manager menu contains functions that let you register your service provider accounts, and delete or deactivate your Sams

Account. If you associate the account, you will be able to log onto the account through Smart Hub easily, without entering your account name or passwo

1. In the Account Manager menu, select the Link to other accounts. The Link to other accounts window appears.2. Select an application you want to asso

account on this application.4. If you have entered the ID and password correctly, the Registered successfully. message appears.5. If want to add anoth

all your current registered Service Accounts that you registered on the Link to other accounts screen.Deactivate account: Deactivates your Samsung acc

SMART Interaction section.Transfer recognised face: Delete registered your face in your Samsung Account. ●ℓService ManagerAuto Ticker: You can set Aut

application on Smart Hub must be downloaded to use this feature. NDepending on your country, the Ticker application may have a different service or no

view details of the event even while you are viewing TV. ●ResetThe Reset function initializes all downloaded applications, erases all user accounts an

Return to the previous menu.Using the Tools menu with the Channel ●Edit FavouritesLets you assign channels you watch frequently to a favourites group

the Smart Hub server. To log into your account, enter your ID and password on the Login screen.To use the Reset function, follow these steps:1. In the

automatically resets. The screen may go black, and then Smart Hub re-appears. In a few moments, it starts the re-initialization procedure.4. To comple

about Smart Hub.More: Lists information about Smart Hub version, Memory Usage, and the Unique ID.Terms of Service Agreement: Display the Terms of Serv

∫Using the Samsung AppsℓSamsung Apps™ → Samsung AppsSamsung Apps is a store from which you can download applications to use on Samsung TV/AV equipment

New applications are added regularly.Using the coloured and function buttons with the Samsung Apps ●a Login / LogoutLog in or log out to your Samsung

To sort the applications by Recommended, Name, Date or Downloaded. NYou can sort all categories except Most Popular. ●} View ModeEach time you select

Move to previous page. ●µ NextMove to next page. ●T ToolsDisplays the option menu. ●R ReturnMoves to previous menu.Using the Samsung Apps by categoryT

User can easily find newly (latest) registered application. ●Most PopularDisplays the most popular applications for users. ●VideoIncludes apps that pr

sudoku and chess. ●SportsIncludes apps that provide sports content such as game results, images and short length video. ●LifestyleIncludes apps that p

●InformationIncludes apps that provide information content such as news, financial information, stock quotes, weather, etc. ●EducationIncludes apps t

2. Select a using your remote. The selected channel will be added to the favourite group. NAlso, you can select a channel in the Edit Favourites scree

purchased app list or already installed applications on your TV like detailed information, download contents etc. NYou can purchase App cash that you

follow these steps:1. On the Samsung Apps screen, select Search Samsung Apps. The Search window appears.2. Enter a keyword you want to search using yo

NYou can find the keyword in the search history if you searched a keyword before.

ℓ∫Search™ → Search(May not be available, depending on your country.)Easily search for and access content from diverse sources (e.g. applications, Your

search term using your remote. NIf you want to search by category, select a category using your remote.Using the Search function by category ●Your Vid

You can search by selecting a key word in the key word list. The key word list displays words you frequently use for searches. ●Top applicationYou can

history if you searched a keyword before. ●b RefreshRefresh the Search function. ●T ToolsYou can set a general setting for Search function or delete t

●General SettingsKeyword recommendation: Turns on or off the Keyword Recommendation function.Search area: Sets a search scope. The default is allowed

2. Select General Settings.3. Select an application in the Search area. A c mark disappears in the check box.4. When done, select RETURNR. ●Search his

∫ℓYour Video™ → Your Video(May not be available, depending on your regions and country.)Using this service from Smart Hub, you can get video recommend

3. When done, select OK on the right side. The channel is made a favourite and is assigned to the favourites group you selected.4. Edit completed. app

need a vendor account.Using the Your Video Search Tab1. On the Smart Hub screen, select Your Video.2. If this is the first time you have accessed Your

movies with Recommended at the top of the screen highlighted. Move the highlight from the top of the screen down to the first movie, and then scroll t

shows, and From friends.5. To select a movie, highlight it, and then press the E button. The movie's Data screen appears. On this screen you can

can stream the movie for a certain number of hours or days. NTo go to a vendor's web site, you must have that vendor's app installed in Smar

8. Enter the name of the movie into the Search field. As you enter characters, the Search function will display suggestions below. You can either cont

Enter or you can move the highlight down using the down arrow key.Using the Function and Coloured Buttons on the Search Tab ●a Login / LogoutTo login

and 8). ●T My PageDisplays your My Video Bookmarks, Likes/Shares (if you have a Facebook or Twitter account registered in Smart Hub), and lets you est

on a Movie's Data Page ●a Login / Logout ●To log in to your Smart Hub account or log out. ●b Bookmark / UnbookmarkTo bookmark a movie or video or

●{ SearchTo search for movies or videos (Steps 7 and 8). ●} HomeTo go to the My Video Home screen. ●T My PageDisplays your My Video Bookmarks, Likes/

●R ReturnReturn to the previous page or menu.Using the Your Video Genre TabWhen you start Your Video, the Your Video screen displays the Search tab.

Lock a channel so that the channel cannot be selected and viewed. NThis function is available only when the Channel Lock is set to On. ●Rename channel

screen, and then select Genres. The Genres tab appears.2. On the Genres tab, select either Movies or TV show on the left side of the screen.3. On the

4. Highlight a movie or TV show and then select it. The Data screen for that movie or TV show appears.Using the Function and Coloured Buttons on a Gen

To re-display the Genres tab. ●{ SearchTo search for movies or videos. ●} SortTo sort movies or videos by Ratings, Year, or Title. ●T My PageDisplays

certain Preferences. ●R ReturnReturn to the previous page or menu.Using My PageMy Page displays your My Video Bookmarks, Likes/Shares (if you have a F

the bottom of a screen, select or press T. My Page appears displaying your bookmarked movies and videos. Select a bookmarked movie or video, access yo

or log out. ●{ SearchTo search for movies or videos. ●} HomeTo go to the My Video Home screen. ●R ReturnReturn to the previous page or menu.

∫ℓFamily Story(May not be available, depending on your regions and country.)™ → Family StoryFamily Story feature allows you to share photos, messages,

●Invite MembersAfter creating a group, you can invite the family members who you want to share your family's photos and events with to join. ●Jo

Hub account to create a family group, access your group, or use Family Story.ℓTo create a family group, follow these steps:1. On the Smart Hub screen,

3. Select OK. The Family Story agreement appears. Read the agreement, and then select Agree. NIt is required to agree with the terms prior to using Fa

●Edit Channel NumberEdit the channel number by select the numbers. NThis function may not be supported depending on the region. ●Sorting (digital cha

connected to your TV via USB.) N* Fields marked with an asterisk are required.5. When done, select Done. The group creation is completed. NIf you want

ℓTo invite members to your Family Story group, follow these steps:1. From the starting menu in Family Story, open the Tools menu using your remote con

screen appears.4. Select Select to enter message.. The keypad screen appears.5. Enter message using your remote control. When finished, select OK on t

phone number or Samsung account ID using your remote control. When finished, select OK on the bottom of the keyboard, and then, select Done. NIf you w

9. If invited by phone number, 4-digit invite code will be generated and the code needs to be shared with the member. If invited by Samsung Account, t

terms.2. You will see a pop-up message asking about invitation type. If you were invited by phone number, please select Invite Code. If you were invit

if you don't want to join the inviting group.4. If joining by Invite Code, first enter your phone number using your remote control. When done, se

and then select Done to finish.5. Select OK. Joining your family group has been completed.Creating an AlbumYou can upload pictures from a USB device a

steps:1. Attach a USB device containing the pictures you want to upload to the picture album to your TV.2. Log into your Smart Hub account, and then s

4. Highlight and select Add on the Album tab. The File Browser screen appears.5. Highlight and select the USB device. The device opens, displaying eit

channel. ●DeleteDelete a channel to display the channels you want. ●Select All / Deselect AllSelect all channels in the list. / Deselect all channels

select the folder that contains the pictures you want to upload. Then, select each file you want to upload. A check appears on each file. NYou can hig

some or all the photos you want to upload. NTo delete a photo from the upload queue, select T Tools. In the Tools menu, select Delete Photos. Either h

Select Yes.9. Highlight and select the Done button on the bottom of the screen. The photos are uploaded, and then the Story of the Day screen appears,

you uploaded. It also displays some of the photos on a "shelf" below the slide show area.Deleting a PictureTo delete a picture, follow these

2. Highlight and select the photo you want to delete.3. Select T Tools.4. In the Tools menu, select Delete. A message appears asking if you want to de

event.To edit a picture, follow these steps:1. On the Cover Story screen, highlight and select the strip of photos on the bottom left. The Story of th

Edit screen appears.5. To add a memo, highlight and select the "enter Memo" field. The Enter Memo screen and keyboard appear.6. To add the p

7. After you have added a memo or added the photo to an event, highlight and select Done on the bottom of the screen.Creating a MemoYou can create a m

and then start Family Story.2. Highlight and select the "create memo" display on the right side of the Family Story screen or select b Creat

and select letters. If you have a USB or Bluetooth keyboard attached to the TV, use the Keyboard to type in letters.5. When done, select OK on the on

Connecting the TVConnecting to an Air or CableThe displayed image may differ depending on the model.Connecting to an AV DeviceConnection and Channel M

1. If you want to delete a channel, select a category of the channel.2. Select a channel in the category list. A c mark appears to the left of the cha

select the "enter Memo' area again. The Enter memo screen and key board re-appear.6. Highlight and select the Done button on the bottom of t

To delete a memo, follow these steps:1. On the Cover Story screen, highlight and select the memos on the right side of the screen. The Story of the Da

to delete the memo.5. Select OK. The memo is deleted.Editing a MemoTo edit a memo, follow these steps:1. On the Cover Story screen, highlight and sele

want to edit.3. Select T Tools.4. In the Tools menu, select Edit. The Edit screen appears.5. Highlight and select the Edit field. The Memo screen and

Creating an EventYou can create a record of an event, such as a birthday party or a wedding, with pictures, that all group members can see. You can al

to upload to your Family Story.2. Log into your Smart Hub account, and then start Family Story.3. Highlight and select the "create event" di

5. Use your remote control to highlight and select letters. If you have a USB or Bluetooth keyboard attached to the TV, use the keyboard to type in le

control. The Event Tab reappears.8. User your remote control to highlight and select the "Enter Description" field. The Enter Description sc

10. Highlight and select the From field. The Time Settings screen appears. Use the up and down arrow buttons on your remote control to change the valu

12. To define the Event Type, highlight and select the Change button. The Event Type list appears.13. Use the up and down arrow buttons on your remote

4. Select Delete. The message Delete the selected channels? appears. Select OK. NYou can delete the selected channel immediately by selecting b using

The device opens, displaying either folders or picture files.16. If picture files are displayed, highlight and select each file you want to upload. A

NYou can highlight and select the Select All button on the right side if you want to select all displayed pictures.18. When finished, highlight and s

In the Tools menu, select Delete Photos. Either highlight and select individual photos or select Delete All. When done, select the Delete button on th

bottom of the Event Tab. Family Story uploads the photos you selected and then displays the Story of the Day screen.20. Select R Return to go back to

and select the events on the bottom right side of the screen. The Story of the Day screen appears.2. Highlight and select the event you want to delete

Editing an EventTo edit an event, follow these steps:1. On the Cover Story screen, highlight and select the events on the bottom right side of the scr

Edit screen appears.5. Edit the elements in the event in the same fashion you first entered them.6. To remove a photo, highlight the photo, and then S

to delete the photos. Select Yes.10. When finished editing, highlight and select Done at the bottom of the page.Functions on the Cover Story (Main) Sc

and select the large Slide Show area. This is the portion of the screen that displays constantly changing pictures. The slide show starts. The slide s

right arrow button on your remote control.4. To change the speed of the slide show, select the l or r button.5. To end the slide show, select R Return

ℓTo set channels as favourites, follow these steps:1. Select the All category.2. Select a channel in the category. A c mark appears to the left of the

Day screen appears displaying the individual photos.2. Highlight and select a photo. The individual photo is displayed. ●To add a comment about the ph

picture. The slide show begins. ●To watch a slide show together with another member of your group, select { Watch together now. This function lets you

and select the memos displayed on the right side. The Story of the Day screen appears displaying the individual memos.2. Highlight and select a memo.

Viewing Individual Events1. On the Cover Story screen, highlight and select the events displayed on the right side. The Story of the Day screen appear

Comment button or select b Add Comment. The Comment screen and keyboard appear. ●To watch a slide show of the pictures saved in the event, highlight a

provides a run down of all the Tools Menu functions by screen.Tools Menu Functions on the Cover Story Screen Group Members: Lists the current group me

Settings: Lets you edit your profile information and set whether your group will allow new content, new members, new invitations, and issue event remi

Updates: Lets you know if there is an update for the Family Story application, and lets you download and install it.Tools Menu Functions on the Story

The rest of the functions - Group Members, My groups, Settings, Logout, and Updates - are the same functions as the Cover Story screen functions.Other

can sort the items on the Story of the Day screen by Date created or Date Uploaded by highlighting and then selecting the Date created / Date Uploaded

3. Open the Tools menu using your remote.4. Select the Edit Favourites. The Edit Favourites screen appears.5. Select a using your remote. The selected

Story displays the items that were uploaded or occurred in that month.

∫ℓFitness(May not be available, depending on your regions and country.)™ → FitnessThe Fitness application provided by Smart Hub lets you track and man

Read these notes before exercising... NPlease warm-up or stretch before exercising. NStop exercising immediately if you feel pain, or dizzy, exhausted

Create Your Avatar. A pop-up message appears. Select Create Profile. The Personal Trainer/Create Profile screen appears.1. To go to next step, press t

screen and keyboard re- appear. Enter your last name. When done, Select OK.4. Press the right arrow button on your remote control. The Gender pop-up

remote control until the Date pop-up appears.7. Enter your birth date using your remote control. It will be used to personalize some parameters for yo

the right again. The Height pop-up appears.10. Enter your height. This will be used to calculate your body mass index (BMI). Move to the right again.

finished. The TV displays your profile information and BMI. To start the Fitness app, select Enjoy Fitness.Using Fitness with categories ●ExerciseProv

profile, exercise progress, achievement of your goals, etc. ●EditEdit lets you change or adjust your fitness goals.Selecting Exercise ProgramsFitness

be downloaded from Samsung Apps. Videos labeled VOD (Video on Demand) are part of a group of free exercise videos. We suggest you download those first

change favourites group, select } using your remote. Each time you select }, a favourites group will be changed.6. When done, select OK. The channel i

Samsung apps.2. Select Yes. The Samsung Apps screen appears. NThis may take a few minutes.3. If this is the first time you have download a VOD program

to download the VOD video app.5. After the video app has been downloaded, press RETURNR several times to go back to the Fitness screen.6. You can now

video.

ℓ∫Kids™ → KidsUsing this function provided by Smart Hub, lets you provides a quick launcher and the recommended list to access the kids or education-r

●ℓPlaygroundDisplays recommended contents and applications. When you select an application or content, the TV executes an application or contents imm

●ℓSticker BookDisplays the Sticker Books collected stickers which your kids received. Also, it can be share with your Family Story.Your kids can rece

watching content.Creating a Sticker Book1. If you want to create a new Sticker Book, select Create a New Sticker Book. The Create a New Sticker Book s

When done, select Next.4. Check the created sticker book. If you want to change a name, select Edit. If you want to change a colour, select Back.5. Wh

will be saved only 10 stickers which recently received. ●ℓBrowse allDisplays the kids or education-related applications list and all contents list. NW

To use the Browse all, follow these steps:1. On the Browse all screen, select a character you wish. The selected character screen appears.2. Select co

Using the coloured and function buttons with Edit Favourites ●When the highlight located in the All, you can use these options: –a AddAdd selected cha

Stories: Displays the e-book contents of the corresponding character.3. The detailed information screen of the selected contents appears. You can play

●ℓParentsLets you can edit the Playground, give stickers to your kids, check a usage time, and set to alarm.My choiceYou can add or delete the conten

1. On the Parents screen, select My choice. The My choice screen appears.2. Select contents you want to add or delete in the list. A pop-up message ap

When your kids did a good job today, you can present a sticker to your kids.To present a sticker to your kids, follow these steps:1. On the Parents sc

4. Select a sticker book you want to present, and then select Present. NIf you want to check a sticker book, select Check Now. You can check the stick

application of your kids through a graph. Also, you can check a usage time of the each content of your kids.Set AlarmLets you can set the watching tim

Alarm. The Set Alarm screen appears.2. Select Timer.3. Select time you wish. The alarm will be set.

ℓ∫Web Browser™ → Web Browser(May not be available, depending on your country.)Using this function provided by the Smart Hub, you can surf the Internet

on a PC.Using the coloured and function buttons with the Web Browser ●b Control PanelShows or hides the control panel in the top of the screen. ●{ Lin

●} PIPTurns PIP on or off. With PIP on, you can watch TV while using the Web Browser. ●T ToolsDisplays the Tools menu.Control Panel: Shows or hides t

changes. –Ÿ Go ToYou can enter a channel number immediately using your remote. –R ReturnReturn to the previous menu. ●When you highlight a favourite c

PIP: Turns PIP on or off.Add to Bookmark: Add to current page to the Bookmarks.Enable Grabbing / Disable Grabbing: You can move to the direction you w

You can scroll the page up or down. NAvailable only when cursor is set to Link Browsing. ●R ReturnClose the Web Browser.ℓUsing the Control Panel with

starting with the icon on the far left of the screen. ●BackMoves to the previous web page. NIf there is no saved previous web page, this icon will not

●Refresh / StopRefreshes the current page or stops the current connection from loading. ●Home PageGoes to the URL you specified as you’re the home pa

Displays the Bookmarks screen. You can set the current page as a bookmark or select a favourite page to visit from the bookmark list. You can also sor

delete the selected page from bookmark list.Using the Tools menu with Bookmark ●Delete AllDelete all bookmark lists. ●Add to BookmarkSets the current

●Export bookmarksYou can export a bookmark file from your TV to the other device connected your TV. ●HistoryDisplays the History screen. You can sele

using your remote. When you highlight a page, the Option appear on the right. In the Option pop-up you can delete the selected page from the history l

up appears. Using your remote, you can enter in a new URL directly. ●Windows ListDisplays list or images of open windows (the Windows List). You can o

List ●Open new windowOpen the new web browser. A new web browser automatically displays the home page. ●Close all windowsClose the currently opened al

Delete the selected channel. –b Change orderChange the favourite group list order. –{ CopyCopy a selected channel to other favourites groups. –} Chang

home page. ●SearchLets you search the web. When you access the Search entry field, the Search screen appears.To search the web by word input, follow t

2. Select Please enter a keyword.. The keypad screen appears.3. Enter the word you want to search using your remote. The TV searches the word by searc

ℓSetting up the Web BrowserMove the cursor to the top of the screen, and then select the Options icon. ●Reading ToolsProvides an easy-to-read page by

Therefore, this function allows access of only the registered web sites. NEvery time you access the Approved Sites, the PIN screen appears and you sho

Approved Sites list.Manage Approved Sites: Lets you key in URLs to add to the Approved Sites List and delete sites from the Approved Sites list. NIf y

Enable or disable the Privacy mode. When the Privacy mode is enabled, the browser does not retain the URLs of sites you visit. If you want to enable P

Lets you configure the PIP function.PIP Position: Select a position for the PIP sub-picture.Sound: Select the audio source you will hear - Main or Sub

visited URL as the home page. –Current Page: Sets the current page as the home page. –Bookmarks: Sets the bookmarks URL as the home page. –Enter URL:

Ad Block Settings: You can determine whether to block advertisements and select the URLs for which advertisements are blocked. –Ad Blocker: Turns the

in the URL, or you can delete a website from the list.General: You can delete your personal information. –Delete history: Deletes the website history.

changes. –E DoneFinish the Change order function. –Ÿ Go ToYou can enter a channel number immediately using your remote. –R ReturnReturn to the previou

defaults. –Hide Menu: Turns on or off the control panel auto-hide.Encoding: You can set the Encoding setting for web pages to Automatic or Manual. –Au

Select an encoding format from the encoding format list.Pointer: You can set the speed of the cursor when the cursor is set to Pointer Mode. –Pointer

ℓ∫Skype™ → SkypeSkype created a little piece of software that makes communicating with people around the world easy and fun.With Skype you can say hel

Skype user’s manual from “www.samsung.com.”[Legal Statement]Due to the various capabilities of products featuring the Samsung Smart Hub - Content Serv

Some features on Smart Hub may also require additional peripheral devices or membership fees that are sold separately. Please visit http://www.samsung

∫SMART InteractionUsing this function, you can access the menu options and functions using speak (dictate) the letters and words or motion gesture qui

logging-in purposes.Logging into the Smart Hub using Face Recognition may be less secure than using an ID and password. ●TV Camera UsageBefore using

you agree that you will not use the camera (i) in locations where cameras are generally prohibited (such as bathrooms, locker rooms or changing rooms)

Control → Voice ControlEnable or disable voice recognition function. Lets you access the menu options and functions using speak (dictate) the letters

–Using the TV’s microphone. (Distant Recognition) –Using the VOICE˜ button on your remote. (Close Proximity Recognition) NWhen you use the TV's

1. Select the favourite’s group category.2. Select a channel in the selected favourites group. A c mark appears to the left of the channel. NYou can s

NThe VOICE˜ button on your remote is always activated. If you want to use TV's microphone, turn on the Voice Control (System → Voice and Motion

hand in the direction of the camera, and shake it three or four times from a side to side. ●∫Voice ControlTurns on or off the Voice Control function.

●∫Trigger wordsYou can select the Trigger words to execute the Voice Control function. ●∫Voice command bar sizeChange the Voice command bar size mode

–Recognition responsiveness: Set the responsiveness level of Voice recognition to Low, Medium or High. ●ℓ∫Voice Control Environment TestYou can test

quiet as possible during the test. –Mic & Speaker Test: This test checks the noise level of the TV microphone and speaker. Select Start using your

the volume level and clarity of your voice when using Voice Control. Select Start using your remote. The test will start. Please say a guide message a

these steps:1. Speak Trigger words that you selected using the microphone embedded in the TV or press the VOICE˜ button on your remote. The TV display

NPronounce the word or phrase clearly and correctly in the language you selected in Language.3. Wait until recognition is complete and then speak the

ℓUsing the Voice Text Input Mode1. Speak "Search All" while in the Voice Control mode.2. Say the word or phrase you wish to search for.3. Th

Control → Motion ControlEnable or disable Motion Control function. Lets you control your TV to move the TV cursor through the Motion Control function.

Using a HDMI (up to 1080p)The displayed image may differ depending on the model.Using an HDMI cable (up to 1080p) NHDMI IN 1(DVI), HDMI IN 2(ARC), HDM

Do you want to delete the selected item(s)? appears.5. Select OK. The message Deleted the selected item(s). appears.Display Icons Used in the Channel

Change the Motion Guide bar mode between Minimum or Full. ●ℓ∫Motion Control Environment TestYou can test brightness of room, camera angle. –Brightness

–Camera Angle Test: Start Camera Angle Test. Select Start using your remote. Please put yourself in the rectangle on the screen by adjusting the came

ℓTo use the Motion Control, follow these steps:1. If you want to use the Motion Control, spread your hand and wave it in the direction of the camera t

hands. NNote that the Motion Control function closes if your hands go out of the camera range. NWhile using the Motion Control, if you use the other d

function –Action: Spreads your hand in the direction of the camera, and shake it three or four times from a side to side. ● Pointing NavigationMoves t

cursor or highlighted. –Action: Clench your fists. ● BackReturn to the previous menu. –Action: Spreads your hand and rotate it to the counter clockwis

the channel / volume control screen appears. –Action: Use the Pointing Navigation to move the cursor to the channel or volume controller, and then use

● ScrollScroll the page to direction you want. For example, suppose that you want to scroll to down.1. Move the cursor to the bottom of the screen (p

NSome application may not be supported this function.ℓFace Recognition™ → Tools → Settings → Account Manager → Face RecognitionEnable or disable face

input your account, and use instead of your account password. NYou can register your face in only one account.To register your face to Samsung Account

∫ℓSchedule Manager™ → Schedule ManagerUsing this function, you can set the TV to display a desired channel automatically on a day and at a time of you

Samsung Account, refer to “Creating an Account” in Smart Hub.1. On the Smart Hub screen, press the Tools menu using your remote and then select Settin

square is changed a colour from red to green. NWhen the TV fails face recognition, select Retry, and then try again.5. When done, the Face Recognition

accounts in the Smart Hub (Tools → Settings → Account Manager → Link to other accounts).To log in to your Samsung Account using Face Recognition, foll

account screen appears.2. Select Face Recognition Mode. The Face Recognition screen appears. NTo return to the Samsung account screen, select Password

4. If a registered face is among the recognized face, the TV logs in the corresponding account automatically. If registered faces are two or more, the

these steps:” procedure. NIf there is no account available to register, you can create an account. For more detailed information, refer to “Creating a

Specification for SMART InteractionVoice Control ●Wake On VoiceEnvironmental and Evaluation CriteriaCondition Evaluation ItemManagement SpecicationsS

●Magic WordEnvironmental and Evaluation CriteriaCondition Evaluation ItemManagement SpecicationsSurrounding Noise ~ 40dB Distance 1M ~ 4MOperating E

●Embedded Voice RecognitionEnvironmental and Evaluation CriteriaCondition Evaluation ItemManagement SpecicationsSurrounding Noise ~ 40dB Distance 1M

Motion Control ●Conditions for RecognitionEnvironmental and Evaluation CriteriaCondition Evaluation ItemManagement SpecicationsOperating Speed Slow /

ℓTo use Schedule Viewing, follow these steps:1. On the Schedule Manager screen, select a using your remote.2. A pop up screen will appear. Select Sche

Face Recognition ●Conditions for RecognitionEnvironmental and Evaluation CriteriaCondition Evaluation ItemManagement SpecicationsSkin ColourWhite, Ye

Smart Touch Control ●TouchEnvironmental and Evaluation CriteriaCondition Evaluation ItemManagement SpecicationsResponse TimeWithin 300 msec.(Connecte

●Server VoiceEnvironmental and Evaluation CriteriaCondition Evaluation ItemManagement SpecicationsSurrounding Noise 45 ~ 50dBVoice Recognition Dista

●Hot KeysEnvironmental and Evaluation CriteriaCondition Evaluation ItemManagement SpecicationsResponse TimeWithin 300 msec.(Connected State)Distance

TV Controller ●UsabilityEnvironmental and Evaluation CriteriaCondition Evaluation ItemManagement SpecicationsTemperature/Humidity0℃ ~ 50℃50% ~ 75%Res

TV Camera ●InternalEnvironmental and Evaluation CriteriaCondition Evaluation ItemManagement SpecicationsSurrounding Noise ~ 40dBDistance (AF Operatio

●ExternalEnvironmental and Evaluation CriteriaCondition Evaluation ItemManagement SpecicationsSurrounding Noise ~ 40dBDistance (AF Operation)1MEnvir

ℓAllShare Play™ → AllShare PlayEnjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC) device and/or your PC. NTo view content

Connecting a USB Device1. Turn on your TV.2. Connect a USB device containing photo, music and/or movie files to the USB port on the TV.3. When a USB d

NThe TV may display the files on the USB device automatically if it is the only device connected.Read this information before using AllShare Play wit

Select Channel to view the channel numbers. Select the desired channel. NYou can only select memorised channels. ●RepeatSelect Once, Manual, Sat~Sun,

data. SAMSUNG is not responsible for any data file damage or data loss. Connect a USB HDD to the dedicated USB (HDD 5V 1A) port. Do not disconnect t

If a USB device you connect to the TV is not recognized, the files on the device are corrupted, or a file in the list is not played, connect the USB

If the database of the saved file list cannot be constructed because there is no free space on the USB device, you may not be able to view a new fil

AllShare Play supports only USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb

If more than 2 PTP devices are connected, you can only use one at a time. If more than two MSC devices are connected, some of them may not be recog

The power-saving mode of some external hard disk drives may be released automatically when you connect them to the TV.File system and formats The U

The file system supports FAT16, FAT32 and NTFS. AllShare Play supports only the Sequential jpeg format. It does not support the Progressive jpeg fo

not support the file type, the Not Supported File Format. message appears. If the files are sorted by Folder view, the TV can display the names of up

The TV cannot play MP3 files with DRM that have been downloaded from a for pay site. Digital Rights Management (DRM) is a technology that supports t

billings and settlements. Even if the file to be played is encoded by a supported format, an error message may appear due to a sub container or profi

Date: You can set a desired date. NThe Date is available only when you select Once in Repeat. ●Start TimeYou can set the start time you want.4. When d

NFor more information on how to configure your TV and connect it to your network, refer to “Setting up the Network” in this manual. NTo view content

network subnet. IP addresses have four parts, separated by periods (111.222.333.444). If your TV and PC are in the same subnet, the first 3 parts of t

network: NThe Background Music and Background Music Setting functions. NSorting files by preference in the Photos, Music, and Videos folders. –The † (

NDepending on the Internet server, when you use AllShare Play through a network connection: –The sorting method may vary. –The Scene Search function

memorizes only the point where the most recent user stopped playing a video.) –The search function may not work depending on the content information.

ℓ∫My list (In AllShare Play)™ → AllShare Play → My listUsing this function, you can access the content easily and quickly. ●Recently playedDisplays th

device is not connected or the file is not found, the "Unable to find the file." message appears. NUp to 48 files are listed in descending o

●What's newDisplays the newly updated videos, photos or music file saved on the USB device or your PC. If you have a newly updated file you want

NYou can create up to 12 playlists. NYou can add up to 100 files to a single playlist. NYou can only add one type of content to a single playlist. Fo

Photos, or Music file list.2. Open the Tools menu using your remote, and then select Add to Playlist.3. Select a file you want to add. The c mark appe

function using your remote after highlighting an item, the Information screen appears. On the Information screen, you can change or cancel the Schedul

5. When done, select Add. The Add to Playlist screen appears.6. Select Create new. The Create a new playlist. screen appears.7. Enter playlist name us

1. Select a playlist you want to edit.2. Open the Tools menu using your remote, and then select Edit playlist. The Edit playlist screen appears.3. Sel

5. When done, select Remove. A pop-up message appears.6. Select Yes. The selected file(s) is removed in the Playlist.

ℓ∫Videos (In AllShare Play)™ → AllShare Play → VideosYou can play video files saved on USB device and/or your PC. NFor more information about the subt

1. On the AllShare Play screen, select Videos.2. Select the device you want to play.3. Select the desired video in the file list. NIf you stop the pla

unknown, the playing time and progress bar are not displayed.Playback control button with Videos ●†, …Each time you select † or … using your remote, t

Control Jump to backward or forward from current position. ●∑Pause the scene. –In pause mode, select …. Each time you select … using your remote, the

new frame will be appear. NTo return to normal speed playback, select r using your remote. NThe product does not play sound in Step mode or Slow Motio

●On the file list screen, you can use the following these options: –ViewYou can sort the file list by selecting sort criteria you want. –Play selecti

NIf you want to use this function, you should log in the Smart Hub. –Login / LogoutYou can login or logout your Samsung Account. –Add to PlaylistLets

screen.To delete an item in a list of scheduled, follow these steps:1. On the Schedule Manager screen, highlight an item you want to delete.2. Open th

Moves to Playlist screen. –InformationDisplays detailed information about the selected file. ●During playback, you can use the following these options

–Scene SearchYou can use the Scene Search function during playback to view or start a movie from the scene of your choice. NIf the index information

title. –Time SearchSearch the video or input the play time directly using your remote. –Repeat ModeYou can play movie files repeatedly. –Picture SizeY

–Sound ModeYou can change the Sound Mode. –Audio LanguageYou can enjoy video in one of supported languages. The function is enabled only when you pla

subtitle file contains multiple languages. –Subtitle SettingsDisplays the Subtitle Settings. You can set up a subtitle option. –InformationDisplays de

function with Family Story, Facebook or Picasa rather than a USB device, View is not supported.1. To sort files in the file lists, select } using your

●TitleSorts and displays the file title in Symbol / Number / Alphabet / Special order. ●Latest DateSorts and shows files by the latest date. ●Earlies

Send your video filesLets you send your video files with your Family Story or send files to other devices. NTo use Send, you must be logged in to Smar

2. Select a video file you want to send. A c mark appears in the check box on the left.3. Repeat Step 2 to select additional videos. NTo select all th

send to.6. Choose the family group to share with. A pop-up window appears.7. Enter a message to send to the family group you selected. NIf the QWERTY

4. Select Yes. The selected schedule is cancelled.ℓTo use the Schedule Recording, follow these steps:(Digital channels only)Allows you to make a reser

ℓ∫Photos (In AllShare Play)™ → AllShare Play → PhotosViewing a photo (or slide show) NFor more information about the subtitle formats and codec format

2. Select the device you want to play.3. Select the desired photo file in the file list.4. To start the slide show, select ∂ using your remote. NTo ch

NDuring the slide show, all files in the file list are displayed in order, starting from the file you selected. NWhen watching a photo file or slide

Playback control button with Photos ●† / …Change the slide show speed as follow. (Slow, Normal, Fast). ●l, r Standard remote control / Slide to left

Start the slide show. ●∑Pause the slide show.ℓUsing the Tools menu with Photos ●On the file list screen, you can use the following options: –ViewYou c

You can play by selecting the desired music file in the file list. –SendLets you send your photos with your Family Story or photo-related applications

–Add to PlaylistLets you make your own playlist. When you use the playlist, you can play photos you want to enjoy easily and quickly. –Go to playlist

the following these options: –Go to Photos ListMoves to the file list screen. –Start Slide Show / Stop Slide ShowYou can start or stop a slide show. A

–Slide Show EffectYou can set various slide show effects. –Background Music On / Background Music OffYou can start or stop background music. –Backgro

–Picture ModeYou can change the Picture Mode. –Sound ModeYou can change the Sound Mode. NAvailable only when the background music is set to on. –Zoom

1. Select Schedule Manager. The Schedule Manager screen will be displayed.2. Select a using your remote. A pop up screen will appear.3. Select the Sch

–InformationDisplays detailed information about the selected file.Viewing the file lists NWhen you use the AllShare Play function with Family Story,

appears.2. Select sort criteria you want. ●Folder viewDisplays the whole folder. You can view the file name and thumbnail by selecting the folder. ●Ti

Sorts and shows files by the latest date. ●Earliest DateSorts and shows files by the earliest date. ●MonthlySorts and shows photo files by month.Send

Family Story or other devices. NIf you want to use this function, you should log in the Smart Hub.1. For example, suppose that you want to send with y

4. Repeat Step 3 to select additional potos. NTo select all the files in the list, select Select All. To cancel a selection, select the file again.5.

8. Enter a message to send to family group you selected. NIn the QWERTY keypad screen, you can use the keyboard connected to the TV.9. When done, sele

ℓ∫Music (In AllShare Play)™ → AllShare Play → MusicPlaying Music NFor more information about the subtitle formats and codec formats, refer to "Su

2. Select the device you want to play.3. Select the desired music file in the file list or select ∂ using your remote. NTo move a previous page, selec

NIf the sound is abnormal when you play MP3 files, adjust the Equaliser in the Sound menu. (An over modulated MP3 file may cause a sound problem.)Pla

You can start or pause a music file. Alternatively, you can select ∂ or ∑ using your remote. ●Repeat ModeYou can play movie files repeatedly. ●Shuffle

supported. NA USB storage device cannot record until it completes the Device Performance Test. NUSB memory stick is not compatible.4. Set the Aerial,

ℓUsing the Tools menu with Music ●You can use the following options: –ViewYou can sort the file list by selecting sort criteria you want. –Play select

NIf you want to use this function, you should log in the Smart Hub. –Login / LogoutYou can login or logout your Samsung Account. –Add to PlaylistLets

Moves to Playlist screen. –EncodingYou can select an encoding format from the encoding format list. –InformationDisplays detailed information about th

2. Open the Tools menu using your remote, and then select Play selection.3. Select the tracks you want to add. The c mark appears in the check box.4.

5. Select Play. The selected music files play.Viewing the file lists NWhen you use the AllShare Play function with Family Story, Facebook or Picasa ra

2. Select sort criteria you want. ●Folder viewDisplays the whole folder. You can view the file name and thumbnail by selecting the folder. ●TitleSorts

alphabetical order. ●AlbumSorts the music file by album in alphabetical order. ●GenreSorts the music files by the genre.Send your music filesLets you

should log in the Smart Hub.1. For example, suppose that you want to send with your Family Story.2. To send music files in the file list, open the Too

NTo select all the files in the list, select Select All. To cancel a selection, select the file again.5. When done, select Send. The Send screen appe

NIn the QWERTY keypad screen, you can use the keyboard connected to the TV.9. When done, select Send.

connect to a digital device using an HDMI cable. ●An HDMI cable supports digital video and audio signals, and does not require an audio cable. –To con

∫ℓChannel ListUsing this function, you can view the channel list, programme information, and favourite channels, select channels to watch, and use Sch

ℓ∫Recorded TV (In AllShare Play)™ → AllShare Play → Recorded TVTo use the recording or Timeshift function, the connected USB device must be available

deleted. NBefore formatting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible f

Set the current time first to use this function.1. When you record a broadcast programme, select ∏ using your remote. A pop up window will appear. NWe

record until it completes the Device Performance Test. NThe file systems of the PVR output (Personal Video Recorder) and the Camera app are different.

2. Select Length to set up the recording time, and then select OK.Playing Recorded TV Programme1. On the AllShare Play screen, select Recorded TV.2. S

next page, select b.4. Select ∂. ●The selected file is displayed on the top with its playing time.Playback control button with Recorded TV ●†, …Each t

●l, r Standard remote control / Slide to left or right direction Smart Touch Control Jump to backward or forward from current position. ●∑ buttonP

remote. Each time the ∑ function is selected, a new frame will be appear. NTo return to normal speed playback, select r using your remote. NThe produc

ℓUsing the Tools menu with Recorded TV ●On the file list screen, you can use the following these options: –Play Current GroupPlay the contents of the

music file in the file list. –DeleteDeletes the file from the list. –Add to PlaylistLets you make your own playlist. When you use the playlist, you

2. Change a channel or channel list mode.Using the coloured and function buttons with the Channel List NIf you select Info using your remote, the TV d

To enable or disable the lock. –Device ManagementOn the device can scan and format. ●The following functions are available only in selected content it

following these options: –Go to Recorded ListMoves to the file list screen. –Play from the beginningYou can restart a video file from the beginning. –

time directly using your remote. –Repeat ModeYou can play movie files repeatedly. –Picture SizeYou can adjust the picture size to your preference. –Pi

Displays detailed information about the selected file.

Calendar™ → CalendarCalendar function provides information such as solar calendar, lunar calendar, solar terms, heavenly stems, earthly branches, Chin

and solar terms, most Chinese people celebrate their birthdays according to lunar calendar, even when choosing big days such as wedding day, they woul

want.{ Memo List: Show the memo list.† / … Prev./Next Month: Change month.E Edit: Edit focus date note.R Return: Return to up-level menu.Edit NoteYou

button to select the date you want.2. Press ENTER E button to open the note editor, then select the appropriate input method to edit the note. NTips ●

digits and other symbols. ●User can switch input method by using the — button on the remote and delete previous entry by using “PRE-CH” button. ●Key o

to indicate pending status until 1 second has past or another key has been pressed. –The target character is selected when pending status ends.3. Afte

country. ●{ Programme View / Channel ViewFor digital channels, switches the display between Programme View and Channel View.When you select a digital

date is default date (Jan 1, 2012). ●If notes have been added, the note for present day yypops up when the TV is turned on. –If there is no note, noth

user handles the onscreen menu for searching channels. –If the note is very long, it will display “...” at the end. –The number of note entries must n

Edit/Delete Memo ListIn the main screen of Calendar, select the Memo List icon to show memo information.then press the ENTERE button, you can edit or

ℓTimeshiftUsing the Timeshift functionIf you missed a live broadcast, you can see from the recorded broadcast using this feature.1. When you watch a b

function, select ∫ using your remote. NThe Timeshift mode operates for a maximum of 90 minutes. NThe Timeshift function is not supported for analogue

Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs. Note that files saved on the TV cannot be use

the Timeshift function may differ depending on picture quality and the free space on the USB disk drive. ●USB memory stick is not compatible. ●When th

the PVR (Personal Video Recorder) function and a device that supports the HDMI-CEC feature, recording by the PVR function takes precedence. ●If the US

completed the Device Performance Test. ●If you attempt the recording or Timeshift function with a device that did not have the Device Performance Test

●For the Schedule Recording operation,the USB device requires 1.5GB of free space. ●The Schedule Recording function requires 100MB of free space on t

●lr Ch. Mode / ChannelMove to the type of channels you want to display on the Channel List screen. / On the Programme View screen, displays the progr

●When both the Schedule Recording and Timeshift functions are running, and the free space on the USB device decreases to less than 500MB, only the Sc

Timeshift function is not supported (application execution, input signal switching, analogue channel change, etc.), the Timeshift data are not saved.

without an additional message being displayed. ●If a user tunes to a digital channel, the suspended Timeshift function resumes automatically.

Using the DLNA Function™ → AllShare PlayYou can play media contents including videos, photos, and music saved on your mobile phones or the other devic

installation. For details, refer to each device’s user’s guide. NIf your Samsung TV connects to a non-Samsung DLNA server, a compatibility issue may o

(DivX, MP4, 3GP, AVI, ASF, MKV, etc.) –Video thumbnail feature –Bookmark function (to resume video playback) –Auto-chaptering (scene navigation) –Digi

–Search with file names –And many others NTo use the original DLNA functions of Samsung fully, it is recommended that you use the AllShare Play softw

up to use AllShare Settings with this TV. NThe AllShare Settings function is available in all devices which support DLNA DMC. ●Allowed / Denied: Allow

deleted device is turned on or tries to connect to the TV, it may appear on the list again.To play the media contents of the devices connected to DLAN

file list of the connected device using the DLNA function.3. Select the desired file in the file list. The selected file will play.Playing the media c

previous page.ℓUsing the Schedule Viewing in Channel List (Digital channels only)(Digital channels only)You can use Schedule Viewing in Channel List t

screen appears on the bottom of your TV.2. Select the Allow to accept the connected devices. The media contents of the devices can be playing on your

phone will be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears. –If you close the alarm window usi

Select Allow. This permits the phone to access the TV freely and use the Media function to play content. NTo turn off media contents transmissions fro

depending on the type of media content. NUsing the mobile device, you can control the media play. For details, refer to each mobile’s user’s guide.

ℓUsing the MHL functionYou can enjoy videos, photos and music files on your TV when connecting it with a mobile device that supports Mobile High-Defin

of MHL-certified devices, visit the official MHL website (http://www.mhlconsortium.org)To use the MHL function, follow these steps:1. With an MHL-dedi

adapter.2. Select Source using your remote. The Source screen appears.3. Select HDMI3. NTo use the MHL function, you must upgrade the software to the

certified. If you encounter any problem when using the MHL function, please contact the manufacturer of the mobile device. NSome mobile devices (produ

NWhen you use a MHL-dedicated cable, you can charge the connected mobile device even if the TV is in standby state. NThe TV remote control supports t

for Smart Touch Control Menu navigation: Slide your finger in the Touch Pad from one direction to the opposite direction.Press the button in the top

1. Select CH LIST function using your remote. The Channel List screen appears.2. Select a desired digital channel.3. Select { using your remote. The T

ℓ∫Anynet+ (HDMI-CEC)Menu → System → Anynet+ (HDMI-CEC)Anynet+ is a function that enables you to control all connected Samsung devices that support Any

NYou can only control Anynet+ devices using the TV’s remote control, not the buttons on the TV. NThe TV remote control may not work under certain con

refer to the device’s user manual. You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may not support Anynet+ functions. NAnynet

type. NHowever, you can connect only one Anynet+ Home Theatre. To connect an Anynet+ Home Theatre, connect the Home Theatre to the TV using an HDMI ca

(OPTICAL) port on your TV and the Digital Audio Input on the Home Theatre. –To hear 5.1 channel audio, connect HDMI cables to your Anynet+ DVD player,

ℓAnynet+ (HDMI-CEC) MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. ●View TVChanges Anynet+

Shows the menu of the connected device menus. E.g. if a DVD player is connected, the disc menu of the DVD player will appear. ●(device_name) ToolsShow

●(device_name) Title MenuShows the title menu of the disc in the connected device. E.g. If a DVD player is connected, the title menu of the movie in

ℓSetting up Anynet+ (HDMI-CEC) ●Anynet+ (HDMI-CEC)To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. NWhen the Anynet+ (HDMI-CEC) func

NIf the Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. NMay not be enabled depending on t

Schedule Viewing. The selected programme is scheduled. NIf you want to cancel the Schedule Viewing, follow Steps 1 through 4, and then select Cancel s

ℓSwitching between Anynet+ Devices1. Open the Tools menu using your remote, and then select Anynet+ (HDMI-CEC).2. Select Device List. The Device List

NThe Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu. NSwitching to the selected device may take up to 2 minut

then selecting its input source, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.ℓListening thr

screen (System → Anynet+ (HDMI-CEC) → Receiver). Then select Receiver and set to On. NIf your receiver supports audio only, it may not appear in the d

NWhen the receiver (i.e. Home Theatre) is set to on, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (air) sign

receiver.ℓUsing the ARC functionYou can listen to sound through a receiver connected using an HDMI cable without connecting a separate optical cable.

NTo use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMI IN 2 (ARC) port. NTo disable the ARC

ℓ∫TroubleshootingMenu → Support → Self Diagnosis → TroubleshootingIf you have any questions about the TV, first refer to this list. If none of these t

First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.(Go to Menu → Support → Self Diagnosis → Pict

If you have an analogue cable / set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture

Memorizing Channelsℓ∫AerialMenu → Channel → AerialBefore your television can begin memorizing the available channels, you must specify the type of sig

contents. Adjust the Cable/Set top box video output resolution to 1080i or 720p. Make sure you are watching the TV at the minimum recommended distan

cause picture distortion especially in fast moving pictures such as sports and action movies. Low signal level or bad quality can cause picture disto

If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or loose connections may cause

Adjust Energy Saving option in the TV menu (go to Menu → System → Eco Solution → Energy Saving) Try resetting the picture to view the default pictu

Change cable / satellite box resolution.The picture is black and white. If you are using an AV composite input, connect the video cable (yellow) to

If your TV connected with a cable / set-top box, reconnect the AC cord and wait until the cable / set-top box reboots. Set the output resolution of

Support → Self Diagnosis → Sound Test)If the audio is OK, the sound problem may caused by the source or signal.There is no sound or the sound is too l

The picture is good but there is no sound. Set the Speaker Select option to TV Speaker in the sound menu. If you are using an external device, make

to HDMI when you have a HDMI connected to your TV). If you are using a DVI to HDMI cable, a separate audio cable is required. If your TV has a headp

sure a video cable is not connected to an audio input. For aerial or cable connections, check the signal strength. Low signal level may cause sound d

Scans for a channel automatically and stores in the TV. NAutomatically allocated programme numbers may not correspond to actual or desired programme n

and the TV. Make sure the wall outlet is working.The TV turns off automatically. Ensure the Sleep Timer is set to Off in the Setup menu. If your PC

When watching TV from an aerial or cable connection, the TV will turn off after 10~15 minutes if there is no signal.There is no picture/Video. Chec

outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the

This file may not be playable properly. This may appear because of high bit rate of content. Content generally will play but could experience some pl

Please try Setup to add available channels to the channel list. Go to Menu → System → Setup and wait for all available channels to be stored. Verif

cause picture distortion, especially with fast moving pictures such as sports and action movies. A low signal can cause picture distortion. This is n

by the TV.The video is OK but there is no audio. If you are using an HDMI connection, check the audio output setting on your PC.Network ConnectionThe

set to Wireless. Make sure the TV is connected to a wireless IP sharer (router).Recording / TimeshiftThe USB device is not recognized or a Device For

recording. If the USB device has a lock, ensure it is off. Check that the USB device can be formatted when connected to the PC. Connect the USB to t

or the performance of the USB hardware is too low.A message prompts me to format a USB device that has been working well. If the USB device has a loc

Select the channel source to memorise. When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels. ●Search M

The recording function does not work. Check that a USB device is connected. Check that the channel is a recordable digital channel. If the signal i

Timeshift Mode does not work. Check that a USB device is connected. Radio channels and analogue broadcasts are not supported. Data broadcast channe

Timeshift Mode cannot be performed if the USB device has no free memory space. Check that this is not the case. USB memory stick is not supported.

use a low-performance USB device that does not support recording. We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is

of a USB device. If there is no USB device connected, the TV will not record even if the scheduled time is reached. The TV will not record if the US

Several recording devices are connected but the TV stopped recording. If multiple recording devices are connected and the device set as Default Recor

Recording Device and the TV will start recording.OthersThe picture won’t display in full screen. HD channels will have black bars on either side of t

will appear during movies that have aspect ratios different from your TV. Adjust the picture size options on your external device or TV to full scree

Refer to the Cable/Set user manual for the SAMSUNG TV code.A “Mode Not Supported” message appears. Check the supported resolution of the TV, and adju

The TV Signal Information is unavailable in the Self Diagnosis menu. This function is only available with digital channels from an Aerial / RF / Coax

version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out

Modulation, and Symbol Rate manually by the remote control.Network: Selects the Network ID setting mode among Auto or Manual.Network ID: When Network

There are difficulties assembling the stand base. Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you

when the TV source is selected.Your settings are lost after 30 minutes or every time the TV is turned off. If the TV is in the Store Demo mode, it wi

→ System → Setup.You have intermittent loss of audio or video. Check the cable connections and reconnect them. Loss of audio or video can be caused

recommend using cables with 90 degree connectors.You see small particles when you look closely at the edge of the frame of the TV. This is part of th

components source.You turned the TV off 45 minutes ago, and it turned on again. It is normal. The TV operates the OTA (Over The Aerial) function itse

A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture. To prevent this, use felt pads on any su

Support → Downloads) by USB.POP (TV’s internal banner ad) appears on the screen.Select Home Use under Setup mode. For details, refer to the Setup Feat

device. The Anynet+ system supports Anynet+ devices only.You can connect only one receiver (home theatre).Check if the Anynet+ device power cord is pr

in TV mode.Check whether the remote control is Anynet+ compatible.Anynet+ doesn’t work in certain situations. (Searching channels, operating Smart Hub

I want to start Anynet+.Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On. (Menu → System →

rates.∫ℓManual TuningMenu → Channel → Manual TuningScans for a channel manually and stores in the TV. NIf a channel is locked using the Channel Lock f

Select View TV in the Anynet+ menu.Go to Source screen using your remote and select a non- Anynet+ device.The message Connecting to Anynet+ device ...

has finished switching to Anynet+.The Anynet+ device does not play.You cannot use the play function when Setup is in progress.The connected device is

Check whether Anynet+ (HDMI-CEC) is set to On. (Menu → System → Anynet+ (HDMI-CEC))Search Anynet+ devices again.Anynet+ requires an HDMI connection. M

HDMI cable has been disconnected, please repeat the device scan.The TV sound is not output through the receiver.Connect the optical cable between TV a

supports the ARC function.AllShare PlayThis file may not be playable properly.This may appear because of high bit rate of content. Content generally w

Some application contents only appear in English. How can I change the language?The Application content language may be different from the application

Refer to the help website for application service provider information.When a network error occurs, I can only use the setting menu.If network connect

1. To open Web Browser, select Web Browser. The Web Browser may be displayed differently with PC.2. The Web Browser is not compatible with a Java appl

5. Playback of Flash video may be restricted.6. E-commerce, for purchasing products online, is not supported.7. Scrolling a web page that allows only

switch to Pointer mode.)10. Some text may appear corrupted because the number of supported fonts is limited.11. The response to a command on the remot

When Aerial Source is set to Air or Cable ●Digital Channel Tuning: Scans for a digital channel.1. Select the New. NWhen selecting Aerial → Air: Channe

13. Copy and Paste are not supported.14. When writing emails or posting messages, some functions (Such as changing the size or colours.) may not be su

17. The web browsing speed depends on the network conditions.18. PIP will automatically be deactivated if a video is played in the browser. Videos may

with bookmark files in a particular file format only. (Compatible format: Netscape-bookmark-file-1)21. When you import or export the bookmark, the fol

(Menu → System → Time → Clock), the history information may not be saved.24. Visited web site history is saved in chronological order and it will be r

26. Video Content that requires Flash Player 10.2 or higher is not supported.

ℓ∫Using the Smart Touch ControlSmart Touch Control at a GlancePTurns the TV on and off.w / v Adjusts the Volume.< / > Changes channels.RETURNR R

during 30 seconds, the Smart Touch Control will be set to Sleep mode automatically. To wake up the Smart Touch Control, press the Touch Pad.ℓInitial P

2. The TV will connect your Smart Touch Control automatically. Wait until the connection is completed. NIf you want to perform the pairing process aga

If you had experience malfunctioning of the touch pad frequently, you can perform the pairing process again. Follow these steps:1. Press the NUMBERš b

touch pad.ℓUsing the Touch Pad ●Move the HighlightSlide your finger from one side to the opposite direction. N To move the Highlight continuously, sli

has finished, a channel is updated in the channel list. ●Analogue Channel Tuning: Scans for a analogue channel.1. Select the New.2. Set the Programme,

●Open the History screen.Press the Š button in the left centre of Touch Pad. Displays a list of recently used functions. You can select a function ag

●Open the shortcut functions screen.Press the ‹ button in the bottom centre of Touch Pad. Quickly select frequently used functions:To Enter a channel

using your remote. NWhen you enter a channel number, the TV displays an Auto Complete list to start with a corresponding channel number. NIf you chang

quickly.Using the Smart Touch Control with IR BlasterWhen you connect IR Blaster with your TV, you can control connected external devices with your TV

2. Move the IR Blaster to the direction of your TV's IR receiver, and then press the PAIRING button on the bottom of the IR Blaster.3. The TV wil

Lets you control the Set-Top-Box (STB) or the BD player or both connected to the TV using your Smart Touch Control. After you connect the device to th

steps:1. Press the ‹ button in the bottom centre of the Touch Pad. The shortcut functions list appears.2. Select Watch film(BD/DVD), and then press th

Pad. The Universal Remote Setup. screen appears.4. If you are using this function for the first time, the END USER LICENCE AGREEMENT screen appears. S

have?"appears.Select your remote control, and then press the Touch Pad.6. Select Set up a device to control, and then press the Touch Pad. The SE

device is connected to, and then press the Touch Pad. The Brand screen appears. NThe input source will be highlighted. If you don't see a highlig

Channel mode ●P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P9

an entry field appear. Enter the first few letters of the brand name of your device using the Touch Control, and then select Done at the bottom of the

11. Press the Touch Pad. A keyboard and an entry field appear. Enter the first few letters and numbers of the model code of your device using the Touc

Download screen. NIf you can’t find the model in the list the TV displays, select Recommended. If you select Recommended, go to Step 13. If you select

14. The Test screen appears. Press the Touch Pad to select POWER.15. If your external device turns on or off, select YES to download the Recommended c

to Step 16. NRepeat Steps 13 through 15 until the device turns on or off and you select YES. The message Do you have IR Blaster? appears. Go to Step 1

Download. The universal remote setup data is downloaded to your Smart Control.17. The message Do you have IR Blaster? appears. If you have an IR Blast

IR Blaster. Your external device has been setup successfully. NYour IR Blaster must be powered on and connected to TV. For more detailed information a

Select Setup CH.Index. The Zip Code screen appears.20. Enter your zip code to find the TV service in your area. When done, the TV service provider scr

You can control the TV and Set-top box using universal remote for viewing the Set-top box. (e.g. Volume button: Adjust the TV volume. / Channel button

the TV volume. / TOOLS button: Open the BD players option menu.) ●TVYou can only control the TV using universal remote. ●STBYou can only control the S

each aerial broadcasting station or cable channel.

You can only control the BD player using universal remote.

List of key appliedWATCH TV WATCH MOVIE STB only BD onlyHard KeyPower TV TV TV TV Vol + TV TV STB BD Vol - TV TV STB BD CH + STB BD STB

TV OSD Key1~0 STB BD STB BD l r u dhighlight dependent highlight dependent highlight dependent highlight dependent TTX/MIX STB N/A STB N/A PRE

ℓSupported Subtitle and AllShare Play file formatsSubtitleExternal –MPEG-4 timed text (.ttxt) –SAMI (.smi) –SubRip (.srt) –SubViewer (.sub) –Micro DVD

–SubStation Alpha (.ssa) –Advanced SubStation Alpha (.ass) –Powerdivx (.psb)Internal –XsubContainer: AVI –SubStation AlphaContainer: MKV –Advanced Su

–SubRipContainer: MKV –MPEG-4 timed textContainer: MP4ℓSupported image resolutionsFile Extension Type Resolution*.jpg JPG 15360 x 8640*.png PNG 1920

ℓSupported music file formatsFile Extension Type Codec Comments*.mp3 MP3 MPEG1 Audio Layer 3*.m4a*.mpa*.aac*.3gaMPEG4 AAC*.flac FLAC FLACThe Seek (jum

ℓVideo CodecFile ExtensionContainer Video Codec ResolutionFrame rate (fps)Bit rate (Mbps)Audio Codec*.avi*.mkv*.asf*.wmv*.mp4*.mov*.3gp*.vro*.mpg*.mpe

NVideo content will not play, or not play correctly, if there is an error in the content or the container. NSound or video may not work if the conten

played smoothly. NThe menu may take longer to appear if the video’s bit rate exceeds 10Mbps. NSome USB/digital camera devices may not be compatible wi

Other Features∫Clear Scrambled ChannelMenu → Channel → Clear Scrambled Channel（It may be not supported in some regions.)Remove scrambled channels from

AP L4 and AVCHD are not supported. ●For all Video codecs except MVC, VP8, VP6: –Below 1280 x 720: 60 frame max –Above 1280 x 720: 30 frame max –GMC 2

●WMA 10 Pro supports up to 5.1 channel. WMA lossless audio is not supported. ●RealAudio 10 lossless is not supported. ●QCELP, AMR NB/WB are not suppo

ℓData ServiceAllows the user to use information (text, still images, graphics, documents, software, etc.) transmitted via broadcast media.Using Data S

NProvided Data Service information may vary depending on broadcast. NWhile using data service, changing the channel using the numeric functions may n

selected service will be started. NIf a Colour button of a certain function appears on the screen, you can use the offered function by select correspo

Displays the Data Service list and immediately starts Data Service. ●BACKReturns to the previous screen. ●Colour ButtonPerform functions corresponding

Text can be inputted using the numbers and letters printed on and above the numeric keys on the remote control. If you input the numeric keys on the r

the number 3 will alternately appear in order of input. ●TEXTSwitches to teletext mode or Returns to the previous screen. NOperations may differ depen

Runs a selected item. ●EXITStops a running Data Service.

ℓAnti-theft Kensington LockA Kensington Lock is a device you can use to physically fix your TV in place when using it in a public place.You wrap the K

(Depending on the country)Select to use either the built-in or downloaded guide.∫ℓFine TuneMenu → Channel → Fine Tune(Analogue channels only)If the re

around a large, immobile object and then attach the lock to the Kensington slot on the back of the TV.The appearance and locking method may differ fro

NPlease find a “K” icon on the rear of the TV. The Kensington slot is beside the “K” icon.To lock the product, follow these steps:1. Wrap the Kensing

3. Insert the locking device into the Kensington slot on the product.4. Lock the lock. NThese are general instructions. For exact instructions, see th

TV model.

ℓLicenceAutoVolume feature is based on the patented TruVolume technology by SRS Labs Inc.Trademark: Rovi and Rovi Guide are trademarks of Rovi Corpora

DivX Certified® to play DivX® video up to HD 1080p, including premium content.DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc.

Open Source Licence NoticeIn the case of using open source software, Open Source Licences are available on the product menu.Open Source Licence Notice

weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear. NSettings are applied to the channel you’re c

ℓLNAMenu → Channel → LNAIf the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the

●A basic high-speed HDMI cable or one with Ethernet is recommended. This product does not support the Ethernet function via HDMI. ●This product suppo

Changing the Preset Picture Mode∫ℓPicture ModeMenu → Picture → Picture ModePicture modes apply preset adjustments to the picture. NWhen your TV is con

●StandardSuitable for a normal environment. ●NaturalSuitable for reducing eye strain. ●MovieSuitable for watching movies in a dark room. ●ℓEntertainS

connected to a PC via an HDMI to DVI cable.

Adjusting Picture Settingsℓ∫BacklightMenu → Picture → BacklightAdjusts the brightness of the screen by adjusting the brightness of the individual pixe

between dark and light areas of the picture.ℓ∫BrightnessMenu → Picture → BrightnessAdjusts the brightness of the screen. Not as effective as Backlight

ℓ∫ColourMenu → Picture → ColourAdjusts the colour saturation. The higher the Colour setting, the more intense the colour. Low settings remove colour a

Adjusts the amount of green and red in the picture. As you increase the amount of green, the amount of red decreases and vice versa.To adjust picture

NWhen you change an option value, the change will affect the OSD menu also. NWhen connecting a PC using an HDMI-DVI cable, Colour and Tint (G/R) are

Changing the Picture Size∫ℓScreen AdjustmentMenu → Picture → Screen AdjustmentUsing this function, you can select various picture size and aspect rati

be disabled. In this case, set 3D Auto View or 3D Mode to Off. ●The ARC function allows digital audio to output via the HDMI IN 2(ARC) port. It can be

highly recommend you use your TV's 16:9 mode most of the time. NIf you have set Double (à, Œ) mode in PIP (Picture-in-Picture), you cannot adjust

Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.4:3: The default setting for a movie or normal broadcasting. NDo not watch in

without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.ℓSmart View 1: Reduces the 16:9 picture by 50%ℓ

NThe picture size can vary when you play content from Videos in AllShare Play depending on the input resolution. ●∫Zoom/positionAdjusts the picture z

To use the Zoom function after selecting Zoom, follow these steps:1. Select Zoom.2. On the Zoom/position screen, select Zoom, and then zoom in or zoom

selecting Wide Zoom, Zoom or Screen Fit, follow these steps:1. Select the Position.2. On the Position screen, select Position, and then move the pictu

Picture Sizes available by Input Source: –ATV, AV: Auto Wide, 16:9, Wide Zoom, Zoom, 4:3 –DTV: Auto Wide, 16:9, Wide Zoom, Zoom, 4:3, Smart View2 –HDM

720p): 16:9,Wide zoom,Zoom,4:3; (1080i,1080p): 16:9,Wide zoom,Zoom,4:3,Screen Fit NDepending on the input source, the picture size options may vary. N

for each external device you have connected to an input on the TV. Select the Source, and then adjust the settings.

Changing the Picture Options∫ℓAdvanced SettingsMenu → Picture → Advanced SettingsUsing this function, you can configure advanced picture settings to c