Samsung UA40EH6030R User Manual download pdf (Page 41)

◀ ▶

●

If your network requires a Dynamic IP address, you should use an ADSL

modem or router that supports Dynamic Host Configuration Protocol (DHCP).

Modems and routers that support DHCP automatically provide the IP

address, subnet mask, gateway, and DNS values your TV needs to access

the Internet so you do not have to enter them manually. Most home networks

use a Dynamic IP address. Some networks require a Static IP address. If your

network requires a Static IP address, you must enter the IP address, subnet

mask, gateway, and DNS values manually on your TV’s Cable Setup Screen

when you set up the network connection. To get the IP address, subnet

mask, gateway, and DNS values, contact your Internet Service Provider (ISP).

If you have a Windows computer, you can also get these values through your

computer.

You can use ADSL modems that support DHCP if your network requires

a Static IP address. ADSL modems that support DHCP also let you use

Static IP addresses.

It is not supported when the network speed is below or equal to 10Mbps.

English

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 157 158

No comments

Samsung UA40EH6030R User Manual Page 41