Samsung UN32J4290AF User Manual download pdf (Page 31)

30 31

- 31 -

In the IP Settings screen, set IP Setting to Enter Manually.

IP Settings

IP Setting Enter Manually

IP Address 0.0.0.0

Subnet Mask 0.0.0.0

Gateway 0.0.0.0

DNS Setting Enter Manually

DNS Server 0.0.0.0

OK Cancel

Select IP Address. When the IP Address entry window appears, enter three digits into each field

on the IP Address line. If the value has less than three digits, add leading zeroes. For example,

to enter 10, enter 010. After three digits have been entered in a field, the highlight automatically

jumps to the next field.

Enter numbers by pressing the number buttons. After you have filled in all four fields, press the E

button again.

Repeat the process for Subnet Mask, Gateway, and DNS Server.

When done, select OK.

The TV attempts to connect to the network again using the entered settings. Once it has

established the connection, it displays a confirmation message. Select OK.

Network connection speeds may differ depending on the DNS server settings.

For details on the correct DNS server settings, contact your Internet service provider (ISP).

Connecting to a Wireless Internet Network with WPS

MENU > Network > Network Settings

If the router has a WPS push button, you can use it to connect the TV to the router automatically. WPS

automatically configures the SSID and WPA key settings.

●

Your router must support WPS to use the WPS functionality.

On the Network Settings screen, set Network type to Wireless. The TV automatically displays a

list of available wireless networks.

Select WPS (PBC), and then press the router’s WPS or PBC button within two minutes.

The TV automatically acquires the SSID and password settings, and then connects to the

network. Once a connection is established, the TV displays a connection message. Select OK.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 135 136

No comments

Samsung UN32J4290AF User Manual Page 31