4-9
Chapter 4 Diagnosis Modes
■
FSI
FSI stands for Full Spectrum Imaging.
Select a value between 1 - 3 with the Menu dial-button.This function synthesizes images with data
obtained with frequencies of dierent characteristics. Therefore, shallow observation depths yield
higher resolution and deep observation depths yield higher penetration.
■
SRF
SRF stands for Speckle Reduction Filter.
This optimizes an image by minimizing any noise and automatically adjusting the brightness of
outlines. Select a value between 0 - 9 with the Menu dial-button.
■
Frame Rate
This is the rate by which the image displayed is updated per second. Use the Menu dial-button to
select Fast, Normal or Slow.
■
Scan Area
Set the width of the image. The bar for showing the scan area size will be displayed in the screen
and the Softmenu will be changed.
X
Adjusting the position: Use the [1] Pos. switch on the Softmenu.
X
Adjusting the size: Use the [2] Size switch on the Softmenu. Widening / narrowing the Scan
Area, decreases/increases the frame rate (FPS).
X
Exit: Use the [5] Return switch on the Softmenu.
■
Tissue
Select the desired ultrasound speed according to the patient’s tissue type. Use the Menu dial-
button to select Cystic, Adipose, Normal, or Solid.
■
Apex
Each time you press the Menu dial-button, the image is ipped upside down.
Comments to this Manuals