Samsung BIXOLON SRP-275 User Manual download pdf

Quick Reference Guide

Impact printer SRP-275

◈ Check that all Items are Present

The following items are packed in the box. If any items appear to have

shipping damage or are missing, please contact your dealer.

• Impact Printer SRP-275

• AC Adapter & Power Cord

• Ribbon Cassette

• Paper Roll

• User’s Manual & Quick Reference Guide

◈ Startup Information

■ Connecting the Cables

1. Plug the AC adapter and power cord to the power connector of

the printer.

2. Turn off printer and the host ECR(host computer).

3. Plug the interface cable(serial, parallel, USB or Ethernet) into the

interface connector on the printer then fasten the screw on both

sides of the connector.

4. Plug the drawer kick-out cable into the drawer kick-out connector

on the printer.

■ Installing the New Ribbon Cassette

1. Before inserting the ribbon cassette, turn the knob clockwise to

prevent twisting the ribbon.

2. Open the front cover of printer.

3. Insert the new ribbon cassette as shown below and pay particular attention to the

placement of the ribbon behind the Print Head.

4. During inserting the ribbon cassette, turn the knob clockwise again to make sure

the ribbon moves freely in the cassette.

5. Close front cover of printer

Note

Malfunctions and other problems may arise if other than specified ribbon

cassettes are used in the printer. The Warranty may be void if other than specified

ribbon cassettes are used. Contact your dealer or place of purchase for more

information about proper ribbon cassettes.

■ Changing the paper width

1. Open the rear cover.

2. Remove the frame paper control by loosing the two screws(3×6).

3. Reattach the frame paper control in you want. (Insert and tighten two

screws(3×6) to reattach. See the instructions "1.7 Changing the paper width" in

User’s manual.)

4. Close the rear cover.

5. Change the Memory Switch setting for changing paper roll width. (See the

instructions "3.1 Setting the Memory Switches" in User’s manual.)

Drawer kick-out

connector

Interface

connector

Serial/ Parallel/ USB/ Ethernet

Interface cable

Drawer kick-out

cable

AC Adaptor

Power

connector

Power cord

Screw(3x6)

(2pieces)

Frame paper

control

■ Loading New Paper Roll

1. Turn on the printer and open the rear cover by pressing open button.

2. Insert new paper roll.

Be sure to note the correct direction of the paper roll.

3. Pull out a small amount of paper, then close the cover and tear off the extra

paper by pulling it toward the front of the printer.

◈ Using the Operation Panel

Most of the functions of this printer are governed by software, but

you can monitor the printer’s status by looking at the lights on the

control panel and for some procedures you will use the buttons.

■ Feed Button

The feed button is used to feed paper or to start self test and for hexadecimal dump mode.

(See the User’s manual)

■ Power Indicator Light (Green color)

This indicator light is on when the power is turned on. It blinks when the printer is in the self test

printing standby state. Always wait until this indicator light stops blinking before you start using the

printer and before you turn it off.

■ Error Indicator Light (Red color)

When this indicator light is on(but not blinking), it means that the printer is out of paper or almost

out of paper or the printer covers are open. When this light blinking, there is an error. If you see

this light blinking, turn off the printer for a few seconds and then turn it back on. If the light is still

blinking, call your supervisor or a service person.

■ Paper Indicator Light (Red color)

When this indicator light is on, it means that the paper end. Replace the new paper roll.

◈ Self Test

The self test lets you know if your printer is operating properly. It checks the print quality, ROM version, DIP switch

settings, memory switch settings and statistic data. The test is independent of any other equipment or software, so it

is a good idea to run it when you first set up the printer or if you have any trouble. If the self test works correctly, the

problem is in the other equipment or the software, not the printer.

■ Running the self test

1. Make sure the printer is turned off and the printer cover is closed properly.

2. While holding down the Feed button, turn on the printer and continue to hold until the paper begins to feed. The

self test prints the printer DIP switch settings and memory switch settings. And cuts the paper and pauses.

(The power light blinks.)

3. Press the Feed button to continue printing the statistic data.

4. Press the Feed button to continue printing the rolling ASCII pattern.

5. The self test mode terminates after printing the rolling ASCII pattern automatically.

KN02-00008A Rev. 2.0

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Quick Reference Guide

Quick Reference GuideImpact printer SRP-275 ◈ Check that all Items are Present The following items are packed in the box. If any items appear to

Page 2 - ◈ Autotest

Guide de démarrage rapideImprimante matricielle SRP-275 ◈ Déballage de l’imprimante La boîte de l’imprimante devrait contenir les articles. Si

Page 3 - Impresora matricial SRP-275

Guía de Referencia RápidaImpresora matricial SRP-275 ◈ Verificación de los accesorios La caja de la impresora debería incluir los siguientes acc

Page 4 - Mecanismo matricial SRP-275

Guia de Referência RápidaMecanismo matricial SRP-275 Verifique se recebeu todos os itens◈ A embalagem contém os itens seguintes. Se alguns dele

Page 5 - 임팩트 프린터 SRP-275

시작안내서임팩트 프린터 SRP-275 ◈ 내용물 확인 다음 품목이 포장된 박스에 모두 포함되어 있는지 확인한 후, 운송 중 손상되었거나 빠진 품목이 있으면 구매한 곳에 문의 하십시오. • 임팩트 프린터 SRP-275 • AC 어댑터 & 전원 코드

Page 6 - ◈ 使用操作面板

快速参考指南针式打印机 SRP-275 ◈ 检查所有的物品是否完好包装盒中包括下列物品。如果出现毁坏或丢失，请与经销商联系。 • 针式打印机 SRP-275 • 交流整流器和电源线 • 色带盒 • 卷纸 • 用户使用手册和快速参考指南 ◈ 启动信息连接电缆 1

Page 7 - Cправочное Pуководство

Cправочное PуководствоMатричный принтер SRP-275 ◈ Проверте наличие всего перечня Cледующий перечень упакован в коробку. Если какие-то из них отс

Page 8

Quick Reference GuideImpact printer SRP-275 ◈ Check that all Items are Present The following items are packed in the box. If any items appear to

Comments to this Manuals

No comments

Samsung BIXOLON SRP-275 User Manual

Browse online or download User Manual for Printers Samsung BIXOLON SRP-275. Samsung BIXOLON SRP-275 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Printers Samsung BIXOLON SRP-275