Samsung SND-7082 User Manual

NETWORK CAMERAUser ManualSNB-7002/SND-7082/SND-7082F/SNV-7082

overview10_ overviewRECOMENDED PC SPECIFICATIONS • CPU : Intel Core 2 Duo 2.4GHz or higher • Operating System : Windows XP, VISTA, 7, Mac OS • Resolu

setup screen • Enable SNMP v3 : SNMP version 3 will be active. - Password : Specify the default password for SNMP version 3. The default password is &

- Port : The default port of the FTP server is 21; however, you can use a different port number according to the FTP server settings. - Passive mode

setup screenStorageYou can set the record conditions or the use of recording for the SD memory, check the size of stored data, or format the SD memory

Alarm inputYou can set the alarm input type, activation time, and operation mode.1. From the Setup menu, select the <Event ( )> tab.2. Click

setup screenTime scheduleYou can set to save the video data at a certain interval as scheduled regardless of the actual occurrence of the event.1. Fr

Tampering detectionYou can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and

setup screenMotion detection / Video analyticsEvents of motion detection and video analysis can be set to trigger event signal output.1. From the Set

J Motion detection and Video analytics cannot be used simultaneously. Before using, set the minimum and maximum motion sizes to suit desired motion

setup screenTo use Motion detectionIt detects a motion that meets all conditions specified by sensitivity, size and area.1. Select a motion detection

4. Select <Area> tab.You can specify an area on the screen to include or exclude the area to/from detection.You can specify up to 4 areas. • De

English _11● OVERVIEWWHAT’S INCLUDEDPlease check if your camera and accessories are all included in the product package.Appearance Item NameQuantityD

setup screenTo use Video analyticsIt detects event that meets all conditions specified by sensitivity, size and area and the event condition rules.1.

To set the video analysis rulesPassing1. Set the type to <Passing, Entering/Exiting>.2. Set the event rule to <Virtual line based rules>

setup screenAppearing (Disappearing)1. Set the analysis type to <Appearing (Disappearing)>.2. Select the desired event rule: • Defined area b

Face detectionYou can set to detect recognized face and trigger an event accordingly.1. From the Setup menu, select the <Event ( )> tab.2. C

setup screenAudio detectionYou can set to detect sound over the specified level and trigger an event accordingly.1. From the Setup menu, select the &

Alarm output setup1. From the Setup menu, select the <Event ( )> tab.2. Click <Alarm output setup>.3. Set the camera’s type of alarm

setup screenSYSTEM SETUPProduct information1. From the Setup menu, select the <System ( )> tab.2. Click <Product information>.3. Check

Date & Time1. From the Setup menu, select the <System ( )> tab.2. Click <Date & Time>.3. Specify the time and date that will

setup screenUser1. From the Setup menu, select the <System ( )> tab.2. Click <User>.3. Provide the necessary user information. • Admi

Upgrade / Reboot1. From the Setup menu, select the <System ( )> tab.2. Click <Upgrade / Reboot>.3. Select a desired item and set it a

overview12_ overviewAppearance Item NameQuantityDescription Model NameC Mount Adapter, Auto Iris Lens Connector1Used to install the C Mount camera len

setup screen M It may take a max of 20 minutes for the upgrade process.If you forcibly terminate the upgrade process, upgrade will not be completed p

LogYou can check the system log or event log.1. From the Setup menu, select the <System ( )> tab.2. Click <Log>.3. Select a log type.

setup screenProfile accessYou can check the profile information.1. From the Setup menu, select the <System ( )> tab.2. Click <Profile acce

SPECIFICATIONItemsDescriptionSNB-7002 SND-7082(F) SNV-7082VideoImaging Device 1/3” 3.1M PS CMOSTotal Pixels 2,064(H) X 1,578(V)Effective Pixels 2,052(

appendixItemsDescriptionSNB-7002 SND-7082(F) SNV-7082Pan / Tilt /RotatePan Range - 0°~355°Pan Speed -Tilt Range - 0°~90°Tilt Speed -Rotate Range - 0°~

ItemsDescriptionSNB-7002 SND-7082(F) SNV-7082OperationalSens-up (Frame Integration)Off / Auto (2X ~ 60X)AGC (Auto Gain Control) Off / Low / Middle / H

appendixItemsDescriptionSNB-7002 SND-7082(F) SNV-7082NetworkMax. Framerate<3M Mode>* H.264 : Max 20 fps at all resolutions* MJPEG : 800x600 ~

ItemsDescriptionSNB-7002 SND-7082(F) SNV-7082NetworkStreaming Method Unicast / MulticastMax. User Access 10 users at Unicast ModeMemory SlotSD/SDHC Me

appendixItemsDescriptionSNB-7002 SND-7082(F) SNV-7082ElectricalInput Voltage DC 12V, PoE(IEEE802.3af)Power Consumption Max. 9.0W (DC 12V, PoE(class3))

PRODUCT OVERVIEWSNB-7002Unit : mm (inch)English _129● APPENDIX150.5 (5.93")72.0 (2.83")60.0 (2.36")

English _13● OVERVIEWAppearance Item NameQuantityDescription Model NameTapping Screw 1 Used to fix the safety bracketSND-7082FBracket Safety 1 Safet

appendixSND-7082Unit : mm (inch)129.4 (5.09")Ø133 (5.24")Ø90Ø100 .4 (3.95")125°110°130_ appendix

SND-7082FUnit : mm (inch)75.5 (2.97") 49.5 (1.95") 2 (0.08")Ø143 .0 (5.63")Ø159.9 (6.3")Ø122.5 (4.82")Ø100 (3.94")Ø

appendix83.5(3.29")85 (3.35")Ø134.5 (5.3") 46 (1.81")85 (3.35")Ø160 (6.3")Ø100 (3.94")Ø34.5(1.36")SNV-7082Unit

TROUBLESHOOTINGPROBLEM SOLUTIONI can’t access the camera from a web browser. yCheck to make sure that the camera’s Network settings are appropriate. y

appendixPROBLEM SOLUTION<Motion detection / Video analytics> of <Event setup> is set to <Enable>, but no notification e-mail reaches

Open Source AnnouncementGPL/LGPL software licenseThe software included in this product contains copyrighted software that is licensed under the GPL/LG

c) If the modified program normally reads commands interactively when run,you must cause it, when started running for such interactive use in the mos

9. The Free Software Foundation may publish revised and/ or new versions of the General Public License from time to time. Such new versions will be s

To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain res

3. Protecting Users’ Legal Rights From anti-Circumvention Law.No covered work shall be deemed part of an effective technological measure under any app

overview14_ overviewAT A GLANCE (SNB-7002)Front SideItem DescriptionCamera Holder(Mount) HolesUsed when you mount the camera onto the bracket by fixi

occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fi

11. Patents.A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The wo

A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.1

The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means ei

6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing p

12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original cop

6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project

BSD LicenseSome software components of this product incorporate source code covered under the BSD license as follows.Component Name License URLnet-snm

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR C

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

English _15● OVERVIEWItem DescriptioncAuto Iris Lens (Optional)Installed on the lens adaptor.Auto Iris Lens ConnectorUsed to supply power and output

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

The MIT LicenseSome software components of this product incorporate source code covered under the MIT license as followsMIT License 2.0- Acewidget, b

The Independent JPEG Group’s JPEG SoftwareThe software included in this product contains copyrighted software that is licensed under the JPEG license.

Mozilla Public LicenseSince we, at Samsung Techwin, used the Mozilla Firefox component without modifying the source code according to the MOZILLA Publ

(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor Version; 2)

5. Application of this License.This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered

Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a

Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally f

SALES NETWORKSAMSUNG TECHWIN CO., LTD.Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +

overview16_ overviewRear SideItem DescriptionSD Memory Card CompartmentCompartment for the SD memory card. bAudio terminalAUDIO OUT Used to connect t

English _17● OVERVIEWItem DescriptionReset ButtonThe button restores all camera settings to the factory default. Press and hold for about 5 seconds

overview18_ overviewAT A GLANCE (SND-7082)AppearanceItem DescriptionTop coverCase cover used to protect the lens and the main unit.bCamera CaseHousin

English _19● OVERVIEWItem DescriptioncPower PortUsed to plug the power cable.Test Monitor OutOutput port for test monitoring the video output. Use t

Copyright ©2012 Samsung Techwin Co., Ltd. All rights reserved.Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product i

overview20_ overviewUNLOCKUNLOCKbcComponents

English _21● OVERVIEWItem DescriptionLens Lens for the camera.bAlarm I/O Port ALARM IN Used to connect the alarm input signal.ALARM OUT Used to conn

overview22_ overviewAT A GLANCE (SND-7082F)AppearanceItem DescriptionTop coverCase cover used to protect the lens and the main unit.bCamera CaseHousi

English _23● OVERVIEWComponentsItem DescriptionNetwork Port Used to connect the PoE or Ethernet cable for network connection.bAlarm I/O PortALARM IN

overview24_ overviewItem DescriptionLock Release LeverPress the <UNLOCK> levers on both ends to separate camera module from the body. Lens Len

English _25● OVERVIEWAT A GLANCE (SNV-7082)AppearanceItem DescriptionTop coverCase cover used to protect the lens and the main unit.bCamera CaseHous

overview26_ overviewComponentsItem DescriptionNetwork Port Used to connect the PoE or Ethernet cable for network connection.bAlarm I/O PortALARM IN U

English _27● OVERVIEWItem DescriptionLock Release LeverPress the <UNLOCK> levers on both ends to separate camera module from the body. Lens L

28_ installation & connectioninstallation & connectionMOUNTING THE LENS (SNB-7002)Disconnect the power before proceeding. M The C lens and CS

English _29● INSTALLATION & CONNECTIONConnecting the Auto Iris Lens connectorInsert the lens connector into the corresponding hole of the camera.

English _3● OVERVIEWIMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instruc

installation & connection30_ installation & connectionPrecautions before installationEnsure you read out the following instructions before ins

English _31● INSTALLATION & CONNECTION3. Hold down the lock lever in the outer direction as shown and turn the camera body in the <UNLOCK>

installation & connection32_ installation & connectionINSTALLATION (SND-7082F)Disassembling1. Take the camera body with one hand and take the

English _33● INSTALLATION & CONNECTIONTo add an alarm cable (not included)1. For this, first you should remove the top cover from the housing.2.

installation & connection34_ installation & connectionINSTALLATION (SNV-7082)Disassembling1. With the provided L-shaped wrench, loosen 3 bolt

English _35● INSTALLATION & CONNECTIONInstalling on the ceiling directly1. Remove the top cover from the case by referring to the “Disassembling

installation & connection36_ installation & connection4. Loosen and remove the case-fixing screws on the camera unit. (x3)5. Insert the came

English _37● INSTALLATION & CONNECTION2. CEILING MOUNT ADAPTOR(SBP-300CM)/HANGING MOUNT(SBP-300HM3) This adaptor is used when installing the dom

installation & connection38_ installation & connectionAdjusting the monitoring direction for the camera (SND-7082/SND-7082F/SNV-7082)Adjusting

English _39● INSTALLATION & CONNECTIONINSERTING/REMOVING A SD MEMORY CARD J Disconnect the power cable from the camera before inserting the SD m

overview4_ overviewWARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJ

installation & connection40_ installation & connection J Do not insert the SD memory card while it’s upside down by force. Otherwise, it may

English _41● INSTALLATION & CONNECTIONRemoving a SD Memory CardGently press down on the exposed end of the memory card as shown in the diagram to

installation & connection42_ installation & connection J Pressing too hard on the SD memory card can cause the card to shoot out uncontrollab

English _43● INSTALLATION & CONNECTIONMEMORY CARD INFORMATION (NOT INCLUDED)What is a memory card?The memory card is an external data storage dev

installation & connection44_ installation & connectionCONNECTING WITH OTHER DEVICE J The BNC Out terminal of the product is provided for easi

English _45● INSTALLATION & CONNECTIONEthernet ConnectionConnect the Ethernet cable to the local network or to the Internet.Power SupplyUse the s

installation & connection46_ installation & connectionGrounding the Product (SNB-7002)Use a screw driver to connect earth grounding cable to t

English _47● INSTALLATION & CONNECTIONConnecting to Audio Input/OutputUNLOCKNetworkPCMicrophoneSpeakerMicrophoneSpeaker AmpMicrophoneAmpSpeakerMi

installation & connection48_ installation & connection1. Connect the AUDIO IN port of the camera with the microphone or LINE OUT port of the

English _49● INSTALLATION & CONNECTIONConnecting to the I/O port box (SND-7082/SND-7082F/SNV-7082)Connect the Alarm I/O cable to the correspondin

English _5● OVERVIEWClass constructionAn apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing

50_ network connection and setupnetwork connection and setupYou can set up the network settings according to your network configurations.CONNECTING TH

English _51● NETWORK CONNECTION AND SETUPCONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM1. Use the cross LAN cable to connect the net

52_ network connection and setupnetwork connection and setupCONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM1. Use the cross LAN cable to connect the

English _53● NETWORK CONNECTION AND SETUPCONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEMThis is for a small network environmen

54_ network connection and setupnetwork connection and setupBUTTONS USED IN IP INSTALLERItem DescriptionDevice NameModel name of the connected camera

English _55● NETWORK CONNECTION AND SETUPItem DescriptionURLDDNS URL address enabling access from the external Internet.However, this will be replac

56_ network connection and setupnetwork connection and setup3. In the <Address> pane, provide the necessary information. • MAC (Ethernet) Addre

English _57● NETWORK CONNECTION AND SETUPIf using a Broadband Router • IP Address : Enter an address falling in the IP range provided by the Broadban

58_ network connection and setupnetwork connection and setupAuto Network SetupRun <IP Installer_v2.XX.exe> to display the camera search list.At

English _59● NETWORK CONNECTION AND SETUPDYNAMIC IP SETUPDynamic IP Environment Setup • Example of the Dynamic IP environment - If a Broadband Router

overview6_ overviewPlease read the following recommend safety precautions carefully. Do not place this apparatus on an uneven surface. Do not instal

60_ network connection and setupnetwork connection and setupPORT RANGE FORWARD (PORT MAPPING) SETUPIf you have installed a Broadband Router with a cam

English _61● NETWORK CONNECTION AND SETUPSetting up Port Range Forward for several network camerasWhen several network cameras are connected to one B

62_ network connection and setupnetwork connection and setupCONNECTING TO THE CAMERA FROM A SHARED LOCAL PC1. Run the IP Installer.It will scan for c

English _63● WEB VIEWERweb viewerCONNECTING TO THE CAMERANormally, you would1. Launch the Internet browser.2. Type the IP address of the camera in

64_ web viewerweb viewerTo check the DDNS addressIf the camera is connected directly to the DHCP cable modem, DSL modem, or PPPoE modem, the IP addres

English _65● WEB VIEWERINSTALLING SILVERLIGHT RUNTIMEIf your PC has not installed Silverlight Runtime or has just installed an old runtime version, y

66_ web viewerweb viewer5. When done, click <Close>.To install on MAC OS1. Run the file trailing with “.dmg”.2. Run the install package file

English _67● WEB VIEWER4. Select your language on the language selection screen, and click <Continue>.5. Click <Agree>.6. Click <In

68_ web viewerweb viewer7. Enter the password of the account currently logged in, and click <Install Software> and continue.8. Once completed,

English _69● WEB VIEWERINSTALLING STW WebViewer PLUGIN If connecting to a camera for the first time, you will see the installation message. Then, ins

English _7● OVERVIEWCONTENTSOVERVIEW33 Important Safety Instructions9 Product Features10 Recomended PC Specifications10 Recomended SD/SDHC Memory

70_ web viewerweb viewerUSING THE LIVE SCREENItem DescriptionMonitoring Move to the monitoring screen.bPlayback Switch to the monitoring screen that

English _71● WEB VIEWERItem DescriptionFull Screen Switch the current video to the maximum size of the monitor.Capture Saves the snapshot as an ima

72_ web viewerweb viewerTo control the audio sound 1. Click [Audio ( )] icon to activate audio communication.2. Use [ ] bar to control the volume

English _73● WEB VIEWERSEARCH AND PLAY BY TIME1. Click [Time Search ( )].2. Click a desired date in the calendar.The video on the specified date

74_ web viewerweb viewerTo check time information of the playing video1. Click the [About ( )] button.2. Date and time information appears on the s

setup screenSETUPYou can configure the video & audio, network, event and system settings of the camera in the network.1. In the Live screen, clic

setup screen6. Click the input box of each item and enter / select a desired value. The context menu may differ depending on the selected codec type

To add a video profileYou can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition.1. Se

setup screenWhat is GOV length?GOV(Group of Video object planes) is a set of video frames for H.264 compression, indicating a collection of frames fro

To set the privacy zoneYou can specify a certain area of the camera video to be protected for your privacy.1. Set it to <On>.2. When done, cli

overview8_ overviewSETUP SCREEN7575 Setup75 Video & Audio Setup91 Network Setup100 Event Setup116 System SetupAPPENDIX123123 Specification129 Pro

setup screen • Codec : Sets the codec to be used. - G.711 : A audio codec standard, it uses 64 Kbps PCM (Pulse Code Modulation) encoding.ITU standard

SSDR (Samsung Super Dynamic Range) SetupIn a scene where the difference between bright and dark is severe, you can increase the brightness of the dark

setup screenBLC SetupYou can specify a desired area on the video manually and set the area to be displayed more clearly.1. Select <Backlight>.2

WDR SetupIt displays a sharp image of the objects in a scene where both bright and dark areas exist.1. Select <Backlight>.2. Set <Mode>

setup screen - Manual : Adjust the shutter speed of the camera manually. You can select one between 1/30 and 1/12000sec in 2 mega mode, and select on

- Manual : Adjust the shutter speed of the camera manually. You can select one between 1/30 and 1/12000sec in 2 mega mode, and select one between 1/

setup screen • Dwell time : This is the time while each applicable lighting condition is kept in order to enable the switch between day and night mode

• Dwell time : This is the time while each applicable lighting condition is kept in order to enable the switch between day and night modes. • Duratio

setup screenSmart codec setup Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for the area.

Focus setup (SNB-7002) You can adjust the focus of video image.1. From the Setup menu, select the <Video & Audio ( )> tab.2. Click <Fo

English _9● OVERVIEWPRODUCT FEATURES • Full HD Video Quality •Multi-StreamingThis network camera can display videos in different resolutions and qual

setup screenFocus setup (SND-7082/SND-7082F/SNV-7082)You can adjust the focus and zoom ratio of video image.1. From the Setup menu, select the <Vi

NETWORK SETUPInterface1. From the Setup menu, select the <Network ( )> tab.2. Click <Interface>.3. Set the <Interface> and <I

setup screenPort1. From the Setup menu, select the <Network ( )> tab.2. Click <Port>.3. Type in each item in the Port menu as necessa

DDNSDDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easi

setup screenRegistering with DDNSTo register your product with the Samsung DDNS1. Visit the iPOLiS web site(www.samsungipolis.com) and sign in with a

To connect to the Samsung DDNS in camera setup1. From the DDNS setup page, set <DDNS> to <Samsung DDNS>.2. Provide the <Product ID>

setup screenIP filteringYou can create a list of IPs that you want to grant or deny access to them.1. From the Setup menu, select the <Network (

SSLYou can select a secure connection system or install the public certificate for this purpose.1. From the Setup menu, select the <Network ( )&g

setup screen802.1xWhen connecting network, you can choose whether using 802.1x protocol, and then install the certification.1. From the Setup menu, s

QoSYou can specify the priority to secure a stable transfer rate for a specific IP.1. From the Setup menu, select the <Network ( )> tab.2. Cl