Samsung 7200 Installation Manual download pdf (Page 54)

CHAPTER 3. Mounting and Replacing Boards

3-16

3.3.1.2 WIM

The procedure for setting the jumpers and mounting optional boards on the WIM (WAN

Interface Module) is as follows:

1) Set jumpers JP1 through JP4 of the WIM.

Figure 3.13 Jumper Setting of WIM

Managed LIM function

The Managed LIM is controlled by the WIM and provides the extension functions

related to the Layer 2 QoS management such as 802.1p (packet priority), 802.1q

(VLAN) and IGMP Snooping, etc besides Layer 2 switch functions.

To perform the Managed LIM function to manage the LIM in the WIM, the WIM

and the LIM must be mounted on slot 1 and slot 2, respectively.

2) Align the connector of the WIM to that of the WIMD and firmly press the board

downward.

Figure 3.14 Mounting WIMD on WIM

WIMD

LAN port in the front

panel to connect to Ethernet

Jumper to connect to the LIM

board in slot 2 through the rear

panel (fornt socket in the WIM

board is not used at

this time.)

JP1

JP4

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 124 125

No comments

Samsung 7200 Installation Manual Page 54