Samsung DB40D User Manual download pdf (Page 121)

Turning on the display with Source AutoSwitch Settings On, and the previous video source selection is not active, the display

will automatically search the different video input sources for active video.

Source AutoSwitch Settings

When the Source AutoSwitch Settings is On, the display video source will automatically be searched for active video.

The Primary Source selection will be activated, if the current video source is not recognized.

Secondary Source selection will become active, if no primary video source is available.

If both the primary and secondary input sources are not recognized, the display will perform two searches for an active source,

each search checking the primary and then secondary source. If both searches fail, the display will return to the first video

source and display a message indicating that there is no signal.

When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking

for an active video source, returning back to the first video source in the sequence if no video is found.

Primary Source Recovery

Select whether to restore the selected primary input source when a primary input source is connected.

―

The Primary Source Recovery function is disabled if Primary Source is set to All.

Primary Source

Specify Primary Source for the automatic input source.

Secondary Source

Specify Secondary Source for the automatic input source.

Source AutoSwitch Settings

MENU m → System → Source AutoSwitch Settings → ENTER E

끄기

Source AutoSwitch Settings

Primary Source Recovery

Primary Source

Secondary Source

O

All

HDMI

The displayed image may differ depending on the model.

1 ... 120 121 122 ... 171

No comments

Samsung DB40D User Manual Page 121