Samsung SAMSUNG WB700 User Manual download pdf (Page 89)

Playback/Editing

Viewing ﬁles on a TV or HDTV

Turn on your camera.

•

If you have an Anynet+ compatible Samsung HDTV, and you

have turned the Anynet+ function on in your camera, the

HDTV turns on automatically and displays the camera screen,

and the camera automatically enters Playback mode.

•

If you turn Anynet+ off in your camera, the HDTV does not turn

on automatically.

•

If you don't have Anynet+ on your TV or Anynet+ is turned off

in your camera, turn on your TV, and then select the HDMI

source on your TV using your TV's remote control.

View ﬁles using the buttons on your camera or a remote

control of your HDTV.

•

If your HDTV supports the Anynet+(CEC) proﬁle, turn Anynet+ on in

the camera’s settings menu (p. 101) to control the camera and TV with

the TV’s remote control.

•

Anynet+ lets you control all connected Samsung A/V devices with the

TV remote control.

•

The time it takes for the camera to connect to your HDTV may vary

with the type of SD or SDHC card you use. A faster SD or SDHC card

will not necessarily result in a faster HDMI transfer, because the main

function of the card is to improve transfer rate during shooting.

Viewing ﬁles on an HDTV

You can view high-quality and uncompressed photos or videos

on an HDTV using the optional HDMI cable. HDMI (High Deﬁnition

Multimedia Interface) is supported by most HDTVs. For details,

see the HDMI Kit manual.

In Shooting or Playback mode, press [

Select

 HDMI Size.

Select an HDMI resolution. (p. 101)

Turn off your camera and HDTV.

Connect your camera to your HDTV using the optional

HDMI cable.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 129 130

No comments

Samsung SAMSUNG WB700 User Manual Page 89