Samsung HT-J5550K User Manual download pdf (Page 10)

10 - English

Connections

Installing the Speakers on the Tallboy Stand

* HT-J5530K only - Front Speakers

HT-J5550K/J5550WK only - Front/Surround

Speakers

1. Turn the Stand Base upside-down and connect

it to the Stand.

2. Use the driver to fasten the screws (5x20) on the

4 marked holes.

3. Straighten the provided speaker cable and run it

through the center hole of the Stand Base.

4. Connect the upper Speaker to the assembled

Stand.

5. Insert a screw (5x15) and fasten it lockwise

through the hole on the rear of the speaker

using a screwdriver.

6. Arrange the speaker cable along the groove on

the rear side of the stand pole.

7. Connect the arranged speaker cables to the

port on the speaker’s rear side while matching

their colors.

8. This is the appearance after the speaker is

installed.

Follow this steps to install other speaker.

Speaker Cable Connections

1. Match each speaker cable bundle to the correct speaker by matching the colored band on each bundle to

the colored sticker on the bottom or back of each speaker.

2. Connect the speaker wire plugs from each speaker to the back of the product by matching the colored

band on each cable to the colors of the speaker jacks. When connecting, make sure to match label color

on the back of speaker.

Stand Base

Stand

Speaker

Stand

02831V-HT-J5500K_J5530K_J5550K(W)-XA-ENG.indd 10 2015/3/19 10:35:13

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 103 104

No comments

Samsung HT-J5550K User Manual Page 10