Samsung HT-J5550K User Manual download pdf (Page 35)

35 - English

Playing Content

- If the Bluetooth device is turned off, not in

place, or malfunctions.

Note that such devices as microwave ovens, wireless

LAN adapters, fluorescent lights, and gas stoves use

the same frequency range as the Bluetooth device,

and can cause electric interference.



For the best operational compatibility between the

home theater and a Bluetooth device or any other

device, such as a Mobile Phone, we recommend

you update the device's OS to the latest version.

To Disconnect the Bluetooth Device from the

Home Theater

You can disconnect the Bluetooth device from the

Home Theater. For instructions, refer to the Bluetooth

device's manual.

When the Home Theater is disconnected from the

Bluetooth device, the Home Theater will display

DISCONNECTED on the front display.

To Disconnect the Home Theater from the

Bluetooth Device

Press the ( ) button on the front panel of the Home

Theater to switch from BT to another mode or turn

off the Home Theater.

Except when you disconnect the Home Theater

by changing functions, the connected Bluetooth

device will wait a certain amount of time for

a response from the Home Theater before

terminating the connection. (Disconnection time

may differ, depending on the Bluetooth device.)



In Bluetooth connection mode, the Bluetooth

connection will be lost if the distance between the

Home Theater System and the Bluetooth device

exceeds

10 meters

. When the Bluetooth device

comes back into effective range or you restart the

Bluetooth device, you will have to pair the device

and home theater again to reconnect.



In Bluetooth mode, the screen saver will start if

the Bluetooth device stays in the Ready state for

5 minutes. To reconnect the Bluetooth device,

turn off the screen saver, and then connect the

device. To turn off the screen saver, press any

button on the remote control (the Volume button,

a number button, etc.)

Using the Bluetooth Quick Start

When the home theater is turned off, connecting

your smart device to the product via a Bluetooth

connection can turn the home theater on.



The Quick Start function is available when the

home theater's power cord is plugged into an AC

wall outlet.



To use this function, set Settings > System >

Quick Start to On.



To use this function, the Bluetooth connection

between the home theater and your smart device

should have been established before. In other

words, the home theater should be found on the

list of Bluetooth devices your smart device has

already connected to.

Connect your smart device to the product via

Bluetooth. (For information on Bluetooth connections,

refer to your smart device’s manual.)

2. Once connected, the home theater will turn itself

on automatically in BT mode.

Select the desired music to play on your smart

device.

Using the Special Effects Remote

Control Buttons

TV SOUND

DSP/EQTV SOUND

If you have a TV that supports Anynet+ (HDMI-

CEC), the TV SOUND button lets you direct the

TV's audio to the Home Theater Speakers or the TV

Speakers. To use this function, follow these steps:

1. Connect an HDMI cable to the TV and home

theater. (See page 13)

2. Set Anynet+ (HDMI-CEC) On in the home

theater and TV.

Press the TV SOUND button on the remote

control. TV SOUND ON flashes on the display on

the front panel, and then changes to

D. IN.

When TV SOUND is on, TV audio outputs

through the Home Theater speakers.

4. Press the TV SOUND button again to turn TV

SOUND off.

When TV SOUND is off, TV audio outputs

through the speakers of the connected

Anynet+ TV.

02831V-HT-J5500K_J5530K_J5550K(W)-XA-ENG.indd 35 2015/3/19 10:35:21

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 103 104

Comments to this Manuals

No comments

Samsung HT-J5550K User Manual Page 35

Comments to this Manuals

Related products and manuals for Blu-Ray players Samsung HT-J5550K