Samsung HT-J5550K User Manual download pdf (Page 15)

15 - English

Settings

The Initial Settings Procedure

The Home menu will not appear if you do not

configure the initial settings.

The OSD (On Screen Display) may change in

this product after you upgrade the software

version.

The access steps may differ depending on the

menu you selected.

1. Turn on your TV after connecting the product,

and then turn on the product. When you turn

on the product for the first time, the product

automatically displays the Setup Language

screen.

2. Press the ▲▼ buttons to select the desired

language, and then press the

button.

3. Press the

button to start function setup.

Setup

TV Aspect and Network will be set.

Each setting may be changed later under "Settings"

Select

Start

4. The TV Aspect Ratio screen appears. Press

the ▲▼ buttons to select a TV aspect ratio, and

then press the

button.

You have four choices:

16:9 Original - For widescreen TVs. Displays

widescreen pictures in their original 16:9 format

and 4:3 pictures (the old, standard format) in 4:3

pillar box format with black bars on the left and

right.

16:9 Full - For widescreen TVs. Displays

widescreen pictures in their original 16:9 format

and expands 4:3 pictures to fill the 16:9 screen.

4:3 Letter Box - For older, standard screen,

analog TVs. Displays 4:3 pictures in full screen

and 16:9 pictures in letter box format that retains

the 16:9 aspect ratio but puts black bars above

and below the picture.

4:3 Pan-Scan - For older, standard screen,

analog TVs. Displays 4:3 pictures in full screen

and 16:9 pictures in Pan-Scan format that fills

the screen, but cuts off the left and right sides of

the picture and enlarges the middle vertically.

5. The Network screen appears.

- Before you begin, confirm that the product is

connected to your router.

- Set to wired or wireless depending on your

network environment.

- If your wireless network has a security code,

you will need to enter the code to complete

the network connection.

- If you have a network with static IP addresses,

we suggest you select Skip by pressing the

BLUE (D) button.



If you skip network setup here or the setup does

not work correctly, you can set up the product's

network connection later. (See page 21)

✓

Setup | Network

Select your network type.

Network Type

Network cable connected.

Wireless

Wired

Connect

a Previous d Skip m Move " Select

6. The product verifies the network connection

and then connects to the network. When it is

done, press the

button. The "Initial settings

completed." screen appears, and then the

Home screen appears.



If you want to display the Setup screen again

and make changes, select the Reset option. (See

page 20)



If you use an HDMI cable to connect the product

to an Anynet+ (HDMI-CEC)-compliant Samsung

TV and 1.) You have set the Anynet+ (HDMI-CEC)

feature to On in both the TV and the product and

2.) You have set the TV to a language supported

by the product, the product will select that

language as the preferred language automatically.

Settings

02831V-HT-J5500K_J5530K_J5550K(W)-XA-ENG.indd 15 2015/3/19 10:35:15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 103 104

Comments to this Manuals

No comments

Samsung HT-J5550K User Manual Page 15

Comments to this Manuals

Related products and manuals for Blu-Ray players Samsung HT-J5550K