❚
Connecting to Wi-Fi manually
Depending on the network environments, the speaker(s) may not be automatically connected.
In that case, you can set up the speaker manually to connect to the network.
1 If an automatic connection fails, select Not Blinking.
2 WAM5500/WAM3500/WAM3501/WAM1500/WAM1501/
WAM1400 : On the lower part of the speaker, briefly press
SPK ADD/Wi-Fi SETUP and start Wi-Fi Setup.
Soundbar : After turning the speaker on, press and hold the
Wi-Fi SETUP button located at the back for 5 seconds.
WAM7500/WAM6500 : Press and hold the Play/Pause
and Standby buttons on the speaker simultaneously for
more than 5 seconds to initiate Wi-Fi Setup.
• The speaker can wait for 2 minutes in its standby mode
until the Wi-Fi connection is established.
SPK ADDWi-Fi SETUP
DC 24V
SPK ADD/Wi-Fi SETUP
8
4
Comments to this Manuals