Samsung DVD-HR720 User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 260
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
English - 19
Connecting & Setting Up
Connecting the
HDD & DVD RECORDER
1. Disconnect the aerial cable from your TV and
connect it to
ANT IN
connector on the rear panel of
the HDD & DVD RECORDER.
2. Connect ANT OUT (TO TV) connector of the HDD &
DVD RECORDER and the aerial input of your TV
using the supplied aerial cable.
3. Use the Video/Audio Cable to connect ANALOG
AUDIO OUT(R/L)/VIDEO OUT jacks on the HDD &
DVD RECORDER to the Audio &Video jacks on the
TV.
4. Plug in the HDD & DVD RECORDER and TV
5. Turn on the HDD & DVD RECORDER and TV.
6. Press the INPUT button on your TV remote control
until the Video signal from the HDD & DVD
RECORDER appears on the TV screen.
The RF cable connection of this product
sends only signals of TV. You must connect
Audio/Video cables to watch a DVD form your
HDD & DVD RECORDER.
Power off HDD & DVD RECORDER, then you
can watch programmes received through 2 RF
cable.
NOTE
There are several ways to output video signal.
Select one of the following video connecting that
best suits you below.
Case 1 : Connecting to a Video (Composite) output
jack
Case 2 : Connecting to an S-Video output jack
Case 3 : Component Video output jacks
S-Video, Component video and Progressive
Output Modes
S-Video and Component video output are available
only if your TV supports S-Video input or
Component video input, respectively. If S-Video or
Component video output does not work, check the
TV connections and the TV input selection settings.
Compared to standard interlaced video,
progressive scan doubles the amount of video lines
fed to your TV, resulting in a more stable, flicker-
free, clear image than interlaced video. This is only
available with TVs that support progressive scan.
Progressive Scan Output (576p)
Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the
picture, in case of 576 progressive scan picture
problems, It is recommended that the user switch
the connection to the standard definitionoutput. If
there are questions regarding our TV set
compatibility with this model 576p HDD & DVD
RECORDER, please contact our customer service
centre.
Other type of connecting
the Video output cable
or
or
Wall
2-00819W-XFA_18-23_CONNECT 2005.7.14 10:52 AM Page 19
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 259 260

Comments to this Manuals

No comments