Samsung DVD-VR350 User Manual Page 60

  • Download
  • Add to my manuals
  • Print
  • Page
    / 169
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 59
English - 60
Recording
Before starting
1. Check TV channel and Antenna connections.
2. Check the remaining time on the tape.
You can record a TV show in progress by inserting a blank tape
and pressing the
z
(REC) button. You can even add time in preset
increments up to 9 hours by pressing the
z
(REC) button repeatedly.
1. Insert a blank VHS tape into the VCR deck.
• Make sure the tape is long enough to record the entire programme.
2. Press the Number buttons or the PROG/TRK ( / ) buttons to select
the desired channel.
Press the INPUT SEL. button to select AV1, AV2, AV3 or DV input if
recording from an external device connected to the input jacks of the
recorder.
3. Press the REC SPEED button on the remote control to set the Record
Speed to one of the following options:
SP – Standard Play, for best picture quality.
LP – Long Play, for maximum recording time (3 times SP).
Be sure your videotape has a Record Safety Tab. If the tab is
missing, you can cover the opening with a small piece of tape.
The selected Record Speed will appear on the front panel display
and on-screen display.
Basic VCR Recording
Warning: Do not cover this opening unless you are sure you want
to record over the tape.
4. Press the
z
(REC) button on the remote control or front panel.
For options while recording is in progress, see “Special Recording
Features”.
When you watch or record on the VCR during DVD Recording,
some function buttons may not operate.
The message “This function is not available.” will be displayed.
Maximum Recording Time - SP vs. LP
Tape Length SP (Standard Play) LP (Long Play)
E180 Approx. 3 hrs Approx. 6 hrs
E240 Approx. 4 hrs Approx. 8 hrs
E280
Approx. 4 hrs 40 mins Approx. 9 hrs 20 mins
E300 Approx. 5 hrs Approx. 10 hrs
To pause recording
Press the PLAY/PAUSE (
) button to pause a recording in progress.
Press the PLAY/PAUSE (
) button again to resume recording.
You can switch channels by pressing the PROG/TRK (
/ ) buttons
while recording pauses.
To stop recording
Press the STOP button to stop a recording in progress.
01293E-VR350,355-EUR-ENG.indb 6001293E-VR350,355-EUR-ENG.indb 60 2007-04-06 오후 2:56:572007-04-06 오후 2:56:57
Page view 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 168 169

Comments to this Manuals

No comments