Samsung DVD-VR350 User Manual download pdf (Page 80)

Reference

English - 80

Troubleshooting (DVD)

Problem Explanation/Solution

icon appears on

the screen.

You cannot use the operation or function due to one of the following reasons:

(1) Your DVD disc does not support the feature (for example, angles)

(2) You’ve requested a title, chapter, or scan time that is out of the correct range.

Play mode settings

are different from the

settings conﬁ gured

with the Setting menu.

The disc does not support all the selected functions.

In this case, some settings you conﬁ gure on the Setting menu may not work properly.

Cannot change the

aspect ratio.

Aspect ratio is ﬁ xed for DVD disc.

No audio output.

Check whether you selected correct digital output options in the Audio Output Options

menu.

No video or audio output.

The disc tray is ejected

after 2 to 5 seconds.

Did you move your DVD Recorder & VCR suddenly from a cold place to a warm place?

In this case, do not connect the plug to the power outlet and wait for two hours.

Then insert the disc and try to play again.It will work properly when condensation has

evaporated.

Angle operation

does not work during

playback of a DVD disc.

Angle operation is available only when the disc contains images captured at different

angles.

The disc revolves, but

no image or bad quality

images are output.

• Check whether there is damage or foreign materials on your disc.

• Some discs with bad manufacturing quality may not be played back.

• If the scene changes from dark to bright suddenly, the screen may jitter temporarily, but

it is not a defect.

Desired audio

language and subtitle

language are not

played.

Audio languages and subtitle languages are disc-speciﬁ c.

Only the sound and subtitle languages contained on a DVD disc are available and

displayed on the disc menu.

No progressive

output.

• Check whether PS is displayed on front panel.

• Make sure to change the component video output using the Progressive button when

the disc is stopped.

The remote control

doesn’t work.

• Point the remote control at the remote control sensor on your DVD Recorder & VCR.

Operate within distance. (15ft)

Remove obstacles between your DVD Recorder & VCR and remote control.

• Check whether the batteries are depleted.

Other problems

• Read the table of contents and then ﬁ nd and read the sections describing your

problem, and follow the directions given.

• Turn the unit off and on.

• If your problem still persists, contact your nearest Samsung service centre.

No HDMI output.

(DVD-VR355 only)

• Check the Video output is HDMI enabled.

• Check the connection between the TV and the HDMI jack of the DVD Recorder & VCR.

• See if your TV supports this 576p/720p/1080i DVD Recorder & VCR.

Abnormal HDMI

output screen.

(DVD-VR355 only)

• If snow noise appears on the screen, it means that TV does not support HDCP

(High-bandwidth Digital Content Protection).

HDMI output Jitter

(DVD-VR355 only)

• Check your TV system setup correctly.

• Screen Jitter may occur when the frame rate is converted from 50Hz to 60Hz for

720p/1080i HDMI (High Deﬁ nition Multimedia Interface) Output.

• Please refer to the user’s manual of your TV.

01293E-VR350,355-EUR-ENG.indb 8001293E-VR350,355-EUR-ENG.indb 80 2007-04-06 오후 2:58:062007-04-06 오후 2:58:06

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 168 169

Comments to this Manuals

No comments

Samsung DVD-VR350 User Manual Page 80

Comments to this Manuals

Related products and manuals for DVD players Samsung DVD-VR350