Samsung BRF425200AP User Manual download pdf (Page 23)

English 23

Operations

06 Filter Reset (3 sec)

Filter Reset

After about 6 months of using the original water lter (which

typically amounts to about 300 gallons or 1136 liters of water),

the lter indicator blinks red to remind you that the lter needs

to be replaced.

When this happens, replace the lter, and then press and hold

Filter Reset for 3 seconds. This resets the lter lifecycle detector

and turns off the lter indicator.

NOTE

• Some areas have relatively large amounts of lime in their

water. This may reduce the lifecycle of the lter. In these

areas, you will have to replace the water lter more often than

specied above.

• If water is not dispensing properly, the water lter is most

likely clogged. Even if the lter indicator is not blinking,

replace the water lter.

07 Deodorizer Reset (3 sec)

Deodorizer Reset

After about 18 months of using the original deodorizer lter, the

lter indicator blinks red to remind you that the lter needs to

be replaced. When this happens, replace the lter, and then press

and hold Deodorizer Reset for 3 seconds. The lter lifecycle will

be reset and the lter indicator turns off.

08 Door Alarm / °C  °F (3 sec)

Door Alarm

You can enable or disable the door alarm by pressing Door Alarm.

When Door Alarm is enabled and a door is left open for more than

2 minutes, the alarm will sound and the alarm indicator will blink.

The Door Alarm function is enabled by factory default.

°C  °F

You can use the Door Alarm button to switch the temperature

scale between Celsius and Fahrenheit.

To switch the temperature scale, press and hold Door Alarm for

3 seconds.

Untitled-1 23 2018-02-22  10:44:04

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 175 176

No comments

Samsung BRF425200AP User Manual Page 23