Samsung RF28HMEDBSR User Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
English - 26
Operating your French Door
Refrigerator
USING THE CONTROL PANEL
8 6
1
2
3
5
10
4
7 9
(1) Freezer/Power Freeze (3sec)
The Freezer button serves two purposes:
- To set the Freezer to your desired
temperature.
- To turn the Power Freeze function on and off.
1) To set the Freezer temperature,
touch the Freezer button. You can set the
temperature between -15°C (5°F) and -23°C
(-8°F).
2) Power Freeze function
Touch and hold this button for 3 seconds to
decrease the time needed to freeze products in
the Freezer.
It can be helpful if you need to quickly freeze
easily spoiled items or if the temperature in the
freezer has warmed dramatically (For example, if
the door was left open).
When you use this function, the energy
consumption of the refrigerator will increase.
Remember to turn it off when you don’t
need it and return the freezer to your original
temperature setting.
This icon will light up when you activate the
Power Freeze function. Power Freeze function
generates cool air for 72 hours continuously and
it makes the inside of the refrigerator cool faster.
When you have enough, just press and hold the
Freeze (Hold 3 sec for Power Freeze) button
again for 3 seconds to cancel the Power Freeze
function.
(2) Alarm/Filter Reset (3sec)
The Alarm button serves two purposes:
- To turn the door open alarm on and off
- To reset the water filter life indicator.
1) Door Alarm Function
If the door alarm is set to On, an alarm beeps
if any refrigerator door is left open for more
than three minutes. The beeping stops when
you close the door. The door alarm function is
pre-set to On in the factory. You can turn it off
by pressing and then releasing the Alarm button.
You can turn it back on in the same fashion.
The icon lights up when the function is on.
When the Door Alarm function is on and the
alarm sound is triggered, the Door Alarm Icon
will blink while the alarm sounds.
2) Water Filter Life Indicator Function
After you replace the water filter, touch and hold
this button for 3 seconds to reset the water filter
life indicator. When you reset the water filter life
indicator, the Filter icon on the panel turns Off.
The Filter icon will turn red to let you know it is
time to change the water filter after six months
(about 300 gallons). Some areas have large
amounts of lime in their water, which causes the
water filter to clog more quickly. If this is the case
in your area, you will have to change the filter
more frequently than every six months.
(3) Energy Saver
Touching this button turns Energy Saver mode
on and off. When you turn Energy Saver on,
the Energy Saver icon lights. Turn Energy Saver
off and the icon goes off. The Energy Saver
function’s factory setting is “ON”. If condensation
or water drops appear on the doors, turn the
Energy Saver mode off.
DA68-02952G-03.indb 26 2018. 2. 20. �� 10:40
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 131 132

Comments to this Manuals

No comments