Samsung RS25H5000SR User Manual download pdf (Page 10)

English - 10

Flooring

For proper installation, you must place this

refrigerator on a level, hard surface that is the

same height as the rest of the ﬂoor.

This surface should be strong enough to support a

fully loaded refrigerator.

To protect the ﬁnish of the ﬂooring during

installation, cut a large section of the cardboard

carton and place it under the refrigerator where

you are working.

When moving the refrigerator, you need to pull and

push it straight forwards or back.

Do not wiggle it from side to side.

CAUTION

When installing, servicing, or cleaning behind the

refrigerator, be sure to pull the unit straight out and

push back in straight after ﬁnishing.

Important: Make sure that you can easily move

your refrigerator to its ﬁnal location by measuring

doorways (both width and height), thresholds,

ceilings, stairways, etc.

• Make sure you disconnect the water supply line

BEFORE removing the freezer door.

To avoid damage, refer to ‘Separating the water

line from the refrigerator’ in the manual (page

12).

SETTING UP THE REFRIGERATOR

Installing the handles

Important : If you need to remove the refrigerator’s

doors to move it into place, install the handles after

you put the doors back on.

Take the handles out of the right side door.

The handles are included in the box.

DA68-02981E-01.indb 10 14. 1. 20. 7:48

When moving your refrigerator

To prevent ﬂoor damage, be sure the front leveling

legs are in the up position (above the ﬂoor).

Refer to ‘Leveling the refrigerator’ in the manual

(page 14).

SCREW DRIVER(-)

CONTROL LEVER

Fixer screw quantity is optional.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 95 96

Comments to this Manuals

No comments

Samsung RS25H5000SR User Manual Page 10

Comments to this Manuals

Related products and manuals for Fridges Samsung RS25H5000SR