Samsung RS68N8670SL User Manual download pdf (Page 37)

English 37

Installation

Reverse osmosis water ltration system

The water pressure of the water supply system to a reverse osmosis water ltration

system must be between 241 kPa and 827 kPa.

The water pressure of the reverse osmosis water ltration system to the refrigerator’s

cold water line must be at least 276 kPa. If the water pressure is below the specied:

• Check if the sediment lter in the reverse osmosis system is blocked. Replace the lter

if necessary.

• Rell the water tank in the reverse osmosis system with water.

• If your refrigerator has a water lter, it may further reduce the water pressure when

used in conjunction with a reverse osmosis system. Remove the water lter.

For more information or servicing, contact a licensed plumbing professional.

Ordering a new lter

To purchase a new water lter (part type: HAFEX/EXP), contact a local Samsung service

centre.

To mount the water lter into place

1. Attach the lock clips (x2) to appropriate

positions under the sink, for instance.

Then, x the lock clips rmly using

screws.

2. Insert the water lter into the upper

and lower clips in the correct direction.

Make sure to check the vertical

direction of the water lter.

NOTE

If the lter is installed horizontally, water

may remain in the lter. Therefore, vertical

installation is recommended.

CAUTION

Do not mount the water lter on any part

of the refrigerator. This may damage the

refrigerator.

Untitled-7 37 5/10/2018 12:00:07 PM

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 219 220

No comments

Samsung RS68N8670SL User Manual Page 37