Samsung NV73J7740RS Installation Manual download pdf (Page 12)

12 English

Installation

Power connection

01 02 03

L N

01 BROWN or BLACK

02 BLUE or WHITE

03 YELLOW and GREEN

Plug the oven into an electrical socket. If

a plug-type socket is not available due to

allowable current limitations, use a multi-

pole isolator switch (with at least 3 mm

spacing in-between) in order to meet safety

regulations. Use a power cord of sufcient

length that supports the specication H05

RR-F or H05 VV-F, min. 1.5~2.5 mm².

Rated current(A) Minimum cross-

sectional area

10 < A ≤ 16 1.5 mm

16 < A ≤ 25 2.5 mm

Check the output specications on the label

attached to the oven.

Open the rear cover of the oven using a

screwdriver, and remove the screws on the

cord clamp. Then, connect the power lines to

the relevant connection terminals.

The ( )-terminal is designed for

earthgrounding. First connect the yellow

and green lines (earthgrounding), which

must be longer than the others. If you use

a plug-type socket, the plug must remain

accessible after the oven is installed.

Samsung is not responsible for accidents

caused by missing or faulty earthgrounding.

WARNING

Do not step on or twist the wires during

installation, and keep them away from heat-

emitting parts of the oven.

NV73J7740RS_EU_DG68-00614E-01_EN.indd 12 2015-05-18  3:37:20

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 75 76

No comments

Samsung NV73J7740RS Installation Manual Page 12