Samsung GN642FFXD User Manual download pdf (Page 9)

■ Re-assemble the Auxiliary, Semi-Rapid and Rapid burners

as follows :

1. Place the ﬂame spreader (15) on to the burner cup (16) so that

the ignition device and the ﬂame supervision device extend

through their respective holes in the ﬂame spreader.

The ﬂame spreader must click into place correctly.

2. Replace the burner lid (14) ensuring that the locating tabs ﬁt

into the noches in the ﬂame spreader (15).

■ Remove the burner lids and Flame Spreaders by pulling them upwards and away

from the top plate.

■ Soak them in hot water and a little detergent.

■ After cleaning and washing them, wipe and dry them carefully. Make sure that the

ﬂame holes are clean and completely dry.

■ Wipe the ﬁxed parts of the burner cup with a damp cloth and dry afterwards.

■ Gently wipe the Ignition device and ﬂame supervision device with a well wrung-out

cloth and wipe dry with a clean cloth.

■ Before placing the burners back on the top plate, make sure that the injector is not

blocked.

BURNERS

Replace parts in the correct order after cleaning.

- Do not mix up the top and bottom.

- The locating lugs must ﬁt exactly into the notches.

Cleaning and Maintenance (Continued)

Troubleshooting

■ Repairs to the gas and electrical components of this appliance must only be carried out by

a suitably qualiﬁed and competent person to ensure safety.

■ However, some minor problems can be resolved as follows :

Problem Probable cause Solution

Not ignited

No Spark. Check the electricity supply

The burner lid is badly assembled. Assemble the lid correctly.

The middle valve is closed. Open the middle valve

completely.

Badly ignited

The middle valve is incompletely

opened.

Open the middle valve

completely.

The burner lid is badly assembled. Assemble the lid correctly.

The ignition plug is contaminated

with alien substance.

Wipe such alien substance with

dried clothing.

The burners are wet. Dry the burners lids carefully.

The holes in the ﬂame spreader

are clogged.

Clean the ﬂame spreader.

Noise made when

combusted and ignited

The burner lid is badly assembled. Assemble the burner lid

correctly.

Fire off while using

The ﬂame supervision device is

contaminated with alien substance.

Clean the ﬂame supervision

device.

Yellow Flame

The holes in the ﬂame spreader

are clogged.

Clean the ﬂame spreader.

Different gas is used. Check the gas used.

Unstable Flame

The burner lid is badly assembled. Assemble the burner lid

correctly.

Gas Smell

A gas tap has been left on.

Check to see if any gas taps are

on.

There may be a leak between

the coupling and the gas bottle.

Make sure that the connection is

airtight.

■ If problem is not solved, please contact the SamSung customer care

center.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 41 42

Comments to this Manuals

No comments

Samsung GN642FFXD User Manual Page 9

Comments to this Manuals

Related products and manuals for Unknown Samsung GN642FFXD