Samsung HT-E4550K User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 189
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
English 31
|
04 Settings
Networks and the Internet
When you connect this product to a network, you
can use network based applications and functions
such as Smart Hub and BD-LIVE and upgrade
the product's software through the network
connection.
Configuring Your Network Connection
Before you begin, contact your ISP to find out if
your IP address is static or dynamic.
If it is dynamic, and you have a wired or wireless
network, we recommend using the Automatic
procedures described below. If you are using
a wireless connection and your router has the
capability, you can also use WPS(PBC).
To start the configuration process, follow these
steps:
1 . In the Home menu, select Settings, and then
press the
E
button.
2 . Select Network, and then press the
E
button.
3 . Select Network Settings, and then press the
E
button.
The Network Settings menu appears.
Wired Network
First, Check if the network cable connect to the
product.
Wired – Automatic
Network Settings
Cancel
Start
Network cable connected.
Press Start to configure your wired network settings.
If you want to connect to your wireless network,
unplug the network cable.
1 . Select the Start in the Network Settings
menu. And then press the
E
button.
2 . The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When
done, highlight OK, and then press
E
.
Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you’ll need to set the
Network Settings values manually.
1 . Select the Start in the Network Settings
menu. And then press the
E
button.
The Network Status screen appears.
The product attempts to verify the network
connection and fails.
2 . Select IP Settings on the right of the screen,
and then press
E
button.
The IP Settings screen appears.
3 . Select the IP Mode field, and then set to
Manual.
4 . Use the number keypad on your remote to
enter the Network values. Use the
▲▼◄►
buttons on the remote to move from entry
field to entry field. Select Next, and then
press the
E
button.
|
NOTE
|
You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Setting Values"
on next page.
5 . The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When
done, highlight OK, and then press
E
.
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 188 189

Comments to this Manuals

No comments