Samsung DMT300RFS User Manual download pdf (Page 21)

cleaning and maintaining _21

Middle nozzle

1. Pull the upper rack towards the front and

remove it.

2. Check whether the nozzle holes are

clogged by food particles.

3. If cleaning is needed, remove the nozzle.

4. To remove the nozzle, unfasten and

remove the nut, and remove the nozzle.

5. Clean the nozzle, insert it again and fasten

the nut.

6. When fastening the nut, rotate it ﬁrmly by

hand.

7. Check whether the nozzle is engaged

correctly by rotating it by hand.

Upper nozzle

1. Check whether the nozzle holes are

clogged by food particles.

2. If cleaning is needed, remove the nozzle.

3. To remove the nozzle, pull out the upper

rack ﬁrst, remove the duct connected to

the nozzle from the tub bracket, and then

remove the nozzle. To remove the bracket,

use tools such as a screwdriver.

4. Clean the nozzle and connect it to the

duct.

5. Insert the duct into the bracket.

6. Check whether the nozzle is engaged

correctly by rotating it by hand.

STORING YOUR DISHWASHER

If you need to store your dishwasher for an extended period of time, ﬁrst drain and disconnect it, as your

dishwasher may be damaged if water is left in the hoses and internal components before storage.

After draining and disconnecting the dishwasher, be sure to turn off the water supply valve and circuit

breaker.

03 cleaning and maintaining

DMT300-00062A_EN.indd 21 2010-04-19  5:23:57

1 ... 20 21 22 ... 30

No comments

Samsung DMT300RFS User Manual Page 21