Samsung FRENCH2-W User Manual download pdf (Page 13)

setting up _13

01 SETTING UP

setting up your refrigerator

Connectingthewaterlinetotherefrigerator

1. Remove the cap from water line on the unit and insert compression nut to the water line on the unit

after disassembling from provided water line.

2. Connect both water line from the unit and water line in the kit.

3. Tighten the compression nut onto the compression fitting. There should be no gaps between

(A, B & C )

4. Turn water on and check for any leakage.

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to make sure

you get a snug, leak-free connection.

After the water supply has been installed check all the joints to ensure there are no leaks.

• Samsung Warranty does not cover THE WATER LINE INSTALLATION.

• The cost of the water line installation is at the customers expense,

unless the retailer has covered this expense in the delivery charge.

• Please contact a Plumber or Authorized Installer for the installation if

needed.

• If Water leakage occurs due to improper installation, Please contact

installer.

Loosen a

Remove

cap

Water Line

from unit

No gap

Water Line

from unit

CAUTION

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

No comments

Samsung FRENCH2-W User Manual Page 13