Samsung RF62UBRS User Manual download pdf (Page 14)

14_ setting up14_ setting up

SETTING UP THE REFRIGERATOR

Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features

and functions of the appliance. By completing the following steps, your Refrigerator should be fully

operational.

 Place the Refrigerator in an appropriate location with reasonable clearance between the wall and

the Refrigerator. Refer to installation instructions in this manual. (P8. Selecting the best location for

the Refrigerator)

 Once the Refrigerator is plugged in, make sure the interior light comes on when you open the

doors.

 Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get

slightly chilled and the motor will run smoothly.

 After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You

can store food and drinks in the Refrigerator after the temperature is sufﬁciently cool.



REMOVING THE REFRIGERATOR DOORS

Some installations require door/drawer removal to transport the Refrigerator to its ﬁnal location.

Do not remove the door/drawer if it is not needed. Before removing the door/drawer make sure you read

following items.

Disconnect power to the Refrigerator before removing the door or drawer.

 Be careful not to drop, damage or scratch the door/drawer while removing them.

 Be careful not to get injured while removing the door/drawer.

 Reattach the door/drawer properly to avoid:

- Moisture from air leakage.

- Uneven door alignment.

- Wasting energy due to improper door seal.

Phillips Head Driver(+) Flat Head Driver(-) Socket Wrench

(10mm) (for bolts)

Hex Wrench (Ø5mm)

(for Mid hinge)

Hex wrench

(5/32 inch)

(for Mid hinge shaft)

WARNING

DA68-01868N.indb 14 2010.4.14 1:26:53 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 37 38

No comments

Samsung RF62UBRS User Manual Page 14