Samsung RSG5PURS User Manual download pdf (Page 5)

safety information _05

overloading house wiring circuits,

which could cause a ﬁ re hazard

from overheated wires.

• Make sure that the power plug is

not squashed or damaged by the

back of the refrigerator.

• Do not bend the power cord

excessively or place heavy articles

on it.

- This constitutes a ﬁ re hazard.

• Have the power cord repaired

or replaced immediately by the

manufacturer or its service agent

if power cord has become frayed

or damaged.

• Do not use a cord that shows

cracks or abrasion damage along

its length or at either end.

• If the power cord is damaged,

have it replaced immediately by

the manufacturer or its service

agent.

• When moving the refrigerator, be

careful not to roll over or damage

the power cord.

• Do not insert the power plug with

wet hands.

• Unplug the refrigerator before

cleaning and making repairs.

• Do not use a wet or damp cloth

when cleaning the plug.

• Remove any foreign matter or

dust from the power plug pins.

- Otherwise there is a risk of ﬁ re.

• If the refrigerator is disconnected

from the power supply, you

should wait for at least ten

minutes before plugging it back.

• If the wall socket is loose, do not

insert the power plug.

- There is a risk of electric shock or

ﬁ r e .

• The appliance must be positioned

so that the plug is accessible after

installation.

• The refrigerator must be

grounded.

- You must ground the

refrigerator to prevent

any power leakages or

electric shocks caused

by current leakage from

the refrigerator.

• Never use gas pipes,

telephone lines or other

potential lightening rods

as ground.

- Improper use of the ground plug

can result in electric shock.

• Do not dissemble or repair the

refrigerator by yourself.

- You run risk of causing a ﬁ re,

malfunction and/or personal

injury.

• If you smell pharmaceutical or

smoke, pull out power plug

immediately and contact your

Samsung electronics service

center.

1 2 3 4 5 6 7 8 9 10 ... 131 132

Comments to this Manuals

No comments