Samsung T24D391EI User Manual Page 75

  • Download
  • Add to my manuals
  • Print
  • Page
    / 93
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 74
Issues Solutions and Explanations
You have intermittent loss of
audio or video.
Check the cable connections and reconnect them.
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure
the cables are flexible enough for long term use. If mounting the product to a wall,
we recommend using cables with 90 degree connectors.
You see small particles when
you look closely at the edge
of the frame of the product.
This is part of the product’s design and is not a defect.
The PIP menu is not available. PIP functionality is available when you are using a TV, PC, AV, Component, HDMI1/DVI
or HDMI2 source.
POP (product’s internal
banner ad) appears on the
screen.
Select Home Use under Setup mode. For details, refer to the Setup Feature.
"
Watch these troubleshooting on video at www.samsung.com
"
Some functions and pictures shown in this manual are available on specific
models only.
"
To keep your product in optimum condition, upgrade to the latest firmware on

The product won’t turn on. Make sure the AC power cord is securely plugged in to the wall outlet and the
product.
Make sure the wall outlet is working.
Try pressing the
P
button on the product to make sure the problem is not the
remote. If the product turns on, refer to “Remote control does not work” below.
There is no picture/video. Check the cable connections. Remove and reconnect all cables connected to the
product and external devices.
Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-ray etc) to
match the product's input connections. For example, if an external device’s output is
HDMI, it should be connected to an HDMI input on the product.
Make sure your connected devices are powered on.
Be sure to select the correct input source.
Reboot the connected device by unplugging it, and then reconnecting the device’s
power cable.
The remote control does not
work.
Replace the remote control batteries. Make sure the batteries are installed with their
poles (+/–) in the correct direction.
Clean the sensor’s transmission window on the remote.
Try pointing the remote directly at the product from 1.5~1.8 m away.
The cable/set top box remote
control doesn’t turn the
product on or off, or adjust
the volume.
Programme the Cable/Set remote control to operate the product. Refer to the Cable/
Set-Top-Box user manual for the SAMSUNG product code.
English - 75
Other Information
Page view 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 92 93

Comments to this Manuals

No comments