Samsung RF24HSESBSR User Manual download pdf (Page 24)

Both control levers must be touching the

ﬂoor to avoid possible personal injury or

property damage because of tipping.

The refrigerator on an uneven ﬂoor may

tilt.

To prevent this, adjust the leg so that it

contacts the ﬂoor.

If the right side is lower, perform the same

procedure, but with the right control lever.

It is dicult to remove the cover leg

front from the refrigerator, so we do not

recommend making small adjustments

with the control lever.

Instead, refer to the next page for the best

way to make minor adjustments to the

doors.

MAKING MINOR

ADJUSTMENTS TO THE

DOORS

Remember, a leveled refrigerator is necessary for

getting the doors perfectly even.

If you need help, review the previous section on

leveling the refrigerator.

Adjustment part

Fixed part

CAUTION

The left door is ﬁxed.

To make minor door adjustments, adjust

only the right door.

1. Pull out the ﬂex door (1) to reveal the lower

hinge (2).

2. Insert a philips screwdriver (+) (3) into the

shaft (4) of the lower hinge.

3. Adjust the height by turning a philips

screwdriver (+) (3) clockwise (

DOWN

) or

counterclockwise (

).

When you turn a philips screwdriver (+)

counterclockwise ( ), the door will

move up.

(3)

(1)

(3)

(2)

(4)

4. After adjusting the doors, insert the supplied

fastener (6) using a pliers (5) in the gap

between the hinge-grommet (7) and the lower

hinge (8). The number of fasteners you’ll need

to insert depends on the gap.

English - 24

DA68-03022B (EN)-06.indd 24 15. 2. 2. �� 3:36

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 63 64

Comments to this Manuals

No comments

Samsung RF24HSESBSR User Manual Page 24

Comments to this Manuals

Related products and manuals for Side-by-side fridge-freezers Samsung RF24HSESBSR