Samsung RF24HSESBSR User Manual download pdf (Page 28)

Installing a Carbonator into the Refrigerator

To install a new SodaStream 60L Carbonator in the refrigerator, follow these steps:

1. Open the CO

cylinder cover.

• The sparkling water maker is turned o by default. Since the sparkling water maker is

turned o, the “OFF” icon on the display is turned on.

- Refer to Page 44 ; Turning O the Sparkling Water Function.

2. Attach the SodaStream 60L Carbonator to the Regulator, and then rotate it clockwise.

• You must use a Sodastream™ CO

cylinder (60L).

• Replacement SodaStream cylinders are available for easy exchange or reﬁll at local

Sodastream retailers.

• Wrap the used cylinder and return it to the person who delivers the new cylinder in USA

and Canada. In Australia and New Zealand, please return empty CO

Cylinder to the

service or information counter at your local retailer for exchange/reﬁll.

All costs associated to the reﬁll or exchange of the CO

Cylinder are that of the

refrigerator owner.

Thread of CO

cylinder is dierent according to country by country.

3. Push the SodaStream 60L Carbonator into the Support.

4. Lock the SodaStream 60L Carbonator into place by pressing the Lever.

• The inner pressure of the Carbonator may make it dicult to press the lever down.

Hold the lever as shown in the illustration on the right, and then push down.

• If you don’t lock the Carbonator into place, the refrigerator won’t produce sparkling water.

• If the Carbonator is not tightly connected to the Regulator, it will leak CO

gas, producing

a hiss.

If this occurs, repeat Steps 2, 3, and 4, making sure that the Carbonator is ﬁrmly attached

and locked into place.

English - 28

DA68-03022B (EN)-06.indd 28 15. 2. 2. �� 3:36

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

No comments

Samsung RF24HSESBSR User Manual Page 28