
23
Preparation for installation
You must check the model names of the indoor and outdoor units.
Indoor outdoor unit type and combination
Capacity(Btu/h) Type Model name
75k
Indoor unit
AP80S0N
Outdoor unit
AP80S0X
96k
Indoor unit
AP0AS0N
Outdoor unit
AP0AS0X
Moving the outdoor unit
Select the moving route in advance.
Be sure that moving route is safe from weight of the outdoor unit.
Do not slant the product more than 30° when carrying it. (Do not lay the product down sideways.)
The surface of the heat exchanger is sharp. Be careful not to get injured during moving and installing the product.
When moving with a crane
• Fasten the wire rope as shown in the gure.
• To protect damage or scratches, insert a piece of cloth between the outdoor unit and the wire rope.
Wire rope
Plate protection cloth
Outdoor unit leg
When moving with a fork lift
• Insert the fork into the holes at the bottom of the outdoor unit carefully.
• Be careful that the fork does not damage the outdoor unit.
Holes for fork lift
Fork lift
PAC_아프리카 중동향AP80S0A_IBIM_34514A-02_EN.indd 23 2015-04-23 오후 2:18:56
Comments to this Manuals