Samsung PT60A User Manual download pdf (Page 80)

3-4

User Manual

Turning the Power On

While the power is turned o, press the On/O button. Booting will start, and the product logo will be

displayed on the screen. When booting is complete, a 2D mode screen will be displayed in End Exam

state.

CAUTION: Before starting the diagnosis, you must register the patient information.

NOTE:

X

If the power switch has been switched off, wait for 10 seconds before turning on the product.

X

While the system is booting, do not press buttons on the keyboard, and make sure that there are

no objects sitting on the keyboard buttons; otherwise the system may not work correctly.

X

If you turn the product off and on again forcefully, the system may momentarily turn on and

then turn off again. This is a characteristic of the Intel® PC Main Board contained in the product,

and not a system error.

Shutting Down the System

Press On/O button while running the system, then disconnect AC adapter mains plug from the power

outlet.

CAUTION: Pressing the On/O button for longer than five seconds will immediately turn the

power off and may damage the hard disk; do not turn off the power by using this method unless

absolutely necessary.

NOTE: Disconnect the AC adapter mains plug from the outlet to ensure the system is disconnected

from the power source.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 231 232

No comments

Samsung PT60A User Manual Page 80