Samsung WF71F5E1W4W User Manual download pdf (Page 16)

English - 16

3. First, loosen the four screws on the adaptor using a ‘+’ type screwdriver.

Next, hold part (D) and turn part (E) following the arrow until there is

a 5 mm gap.

(*): 5 mm

4. Connect the adaptor to the water tap by tightening all the screws

ﬁrmly while lifting the adaptor upwards.

Then tighten the adaptor by turning part (E) following the arrow.

5. Connect the water supply hose to the adaptor. If you push part (F)

into the adaptor, the hose automatically connects to the adaptor with

a ‘clicking’ sound.

After you have connected the water supply hose to the adaptor,

ensure that it is connected correctly by pulling the water supply

hose downwards.

WARNING: Check if the water supply hose is not twisted or

bent. If the hose is twisted or bent, there is a danger of a water

leak and electric shock due to the water leak. If necessary, you

can reposition the water supply hose at the washing machine

end by loosening the L-shaped arm ﬁtting, rotating the hose,

and retightening the L-shaped arm ﬁtting.

6. Turn on the water supply and ensure that no water leaks from the

water supply intake, water tap or adaptor. If there is a water leak, repeat

the previous steps.

WARNING: Do not use your washing machine if there is a water

leak. This may result in electric shock or injury.

If the water tap has a screw type tap, connect the water supply hose

to the tap as shown.

Use the most conventional type of tap for the water supply. If the tap is square or too big, remove the

space ring before inserting the tap into the adaptor.

Untitled-1 16 2014-03-19 �� 12:25:50

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 219 220

No comments

Samsung WF71F5E1W4W User Manual Page 16