Samsung SCX-3201G User's Guide download pdf (Page 52)

100

Media and tray_ 52

Transparencies

To avoid damaging the machine, use only transparencies designed for laser

printers.

• Transparencies used in the machine must be able to withstand

machine’s fusing temperature.

• Place them on a fl

at surface after removing them from the machine.

• Do n

ot leave unused transparencies on the paper tray for long periods of

time. Dust and dirt may accumulate on them, resulting in spotty printing.

• To avo

id smudging caused by fingerprints, handle transparencies

carefully.

• To avoid fading, do not expose printed transparencies to prolonged

sunlight.

• Ensure

that transparencies are not wrinkled, curled, or have any torn

edges.

• Do not use tra

nsparencies that separate from the backing sheet.

• To

prevent transparencies from sticking to each other, do not let the

printed sheets stack up as they are begin printed out.

Labels

To avoid damaging the machine, use only labels designed for laser

machines.

• When selecting labels, consider the following factors:

- A

dhesives: The adhesive material should be stable at your

machine’s fusing temperature (about 170°C (338 °F)).

- Arr

angement: Only use labels with no exposed backing between

them. Labels can peel off sheets that have spaces between the

labels, causing serious jams.

- Curl: Prior to printing, labels must lie flat with no more than 13 mm

(0.51 inch

.) of curl in any direction.

- Condition: Do not use labels with wrinkles, bubbles, or other

ind

ications of separation.

• Ma

ke sure that there is no exposed adhesive material between labels.

Exposed areas can cause labels to peel off during printing, which can

cause paper jams. Exposed adhesive can also cause damage to

machine components.

• D

o not run a sheet of labels through the machine more than once. The

adhesive backing is designed for only a single pass through the

machine.

• D

o not use labels that are separating from the backing sheet or are

wrinkled, bubbled, or otherwise damaged.

Card stock/Custom-sized paper

Postcards, cards and other custom-sized materials can be printed with this

machine.

• Do not print on media smaller than 76 mm (3.00 inches) wide or 183 mm

(7.20 inches) long.

• In soft

ware applications, set the margins at least 6.4 mm (0.25 inches)

away from the edges of the material.

Letterhead/Preprinted paper

SINGLE-SIDED DOUBLE-SIDED

Face up Face down

• Letterhead/ Preprinted paper must be printed with heat-resistant ink that

will not melt, vaporize, or release hazardous emissions when subjected

to the machine’s fusing temperature about 170°C(338 °F) for 0.1

second.

• L

etterhead/ Preprinted paper ink must be non-flammable and should not

adversely affect machine rollers.

• F

orms and letterhead should be sealed in a moisture-proof wrapping to

prevent changes during storage.

• Before you load letterhead/preprinted paper, verify that the ink on the

paper is dry. During the fusing process, wet ink can come off preprinted

paper, reducing print quality.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 99 100

Comments to this Manuals

No comments

Samsung SCX-3201G User's Guide Page 52

Comments to this Manuals

Related products and manuals for Laser/LED printers Samsung SCX-3201G