Samsung MC26AC2X Service Manual download pdf (Page 23)

Disassembly and Reassembly

Samsung Electronics4-2

No Parts Procedure Remark

Ass’y Tray

Drain.

Electrical Parts

(Main PCB)

Heat

Exchanger

Fan Motor and

Cross Fan

1) Do “1”above.

2) Take all the connector of PCB upper side out.

(Inclusion Power cord)

3) Separate the outdoor unit connection wire

from the terminal block.

4) If pulling the Main PCB up. It will be taken

out.

1) Do “1”, “2” above.

Separate the drain hose from the extension

drain hose.

2) Pull tray drain out from the back body.

1) Do “1” and “2”, “3” above.

2) Loosen two fixing earth screws of right side.

3) Separate the connection pipe.

4) Separate the holder pipe at the rear side.

5) Loosen the three fixing screws of right and

left side.

6) Lifting the heat exchanger up a little to push

the up side for separation from the indoor

unit.

1) Do “1”, “2”, ”3”, “4” above.

2) Loosen the fixing two screws and separate

the motor holder.

3) Loosen the fixing screw of fan motor.

(By use of M3 wrench)

4) Separate the fan motor from the fan.

5) Separate the fan from the left holder bearing.

DB98_11868A(1)_1 3/3/03 11:17 AM Page 2-20

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 65 66

No comments

Samsung MC26AC2X Service Manual Page 23