Samsung MC26AC2X Service Manual download pdf (Page 9)

Operating Instructions and Installation

Samsung Electronics3-2

1. AUTO MODE : In this mode, operation

COOL mode is selected automatically by

the room temperature of initial operation.

∆T= -1°C, -2°C, 0°C+1°C+2°C

∆T is controlled by setting temperature

up/down key of remote controller

* FAN SPEED : AUTO

2. COOL MODE : The unit operates

according to the difference between the

setting and room temperature.

(18°C~30°C)

3. DRY MODE : Has 3 states, each

determined by room temperature.

The unit operates in DRY mode.

*Compressor ON/OFF Time is controlled

compulsorily(can not set up the fan

speed, always breeze).

*Protective function : Low temperature

release. (Prevention against freeze)

4. TURBO MODE : This mode is available in

AUTO, COOL, DRY, FAN MODE.

When this button is pressed at first, the

air conditioner is operated “powerful”

state for 30 minutes regardless of the set

temperature, room temperature.

When this button is pressed again, or

when the operating time is 30 minutes,

turbo operation mode is canceled and

returned to the previous mode.

*But, if you pressed the TURBO button in

DRY or FAN mode that is changed with

AUTO mode automatically.

5. SLEEP MODE : Sleep mode is available

only in COOL mode.

The operation will stop after 6 hours.

*The setting temperature is automatically

raised by 1°C each 1hour When the

temperature has been raised by total of

2°C, that temperature is maintained.

6. FAN SPEED : Manual (3 step), Auto (4 step)

Fan speed automatically varies depending

on both the difference between setting and

the room temperature.

7. COMPULSORY OPERATION :

For operating the air conditioner without

the remote controller.

*AUTO : The operating is the same

function that AUTO MODE in the remote

controller. And each time you press the

button the 5WAY function is changed as

follow. STD ➝ NATURE ➝ POWER ➝

SAVING ➝ SILENCE ➝ POWER OFF

❊ STD(standard)( ) : General opera-

tion Mode

❊ NATURE( ) : The unit is operated

according to health

pattern control

❊ POWER( ) : The unit is operated in

powerful state

❊ SAVING( ) : The unit is operated in

power saving state

❊ SILENCE( ) : The unit is operated

quietly

Each mode has Auto, Cool and SLEEP

operation designed in advance.

Operation Type

Cool Operation

Room Temp

Tr≥25°C+∆T

Tr<24°C+∆T

Compressor ON

Compressor OFF

3-1-2 Name & Function of Key in remote controller

DB98_11868A(1)_1 3/3/03 11:17 AM Page 2-6

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 65 66

Comments to this Manuals

No comments