Samsung RF25HMEDBSR User Manual download pdf (Page 18)

English - 18

Operating your French Door

Refrigerator

USING THE CONTROL PANEL

8 6

1

2

3

5

10

4

7 9

( 1 )

Freezer/

Power

Freeze

(3sec)

The Freezer button serves two purposes:

- To set the Freezer to your desired

temperature.

- To turn the Power Freeze function on

and o.

1) To set the Freezer temperature,

touch the Freezer button. You can set the

temperature between 5 °F (-15 °C) and -8

°F (-23 °C).

1) Power Freeze function

Touch and hold this button for 3 seconds

to decrease the time needed to freeze

products in the Freezer.

It can be helpful if you need to quickly

freeze easily spoiled items or if the

temperature in the freezer has warmed

dramatically (For example, if the door was

left open).

When you use this function, the energy

consumption of the refrigerator will

increase. Remember to turn it o when

you don’t need it and return the freezer

to your original temperature setting. If you

need to freeze a large amount of food,

activate the Power Freeze function at least

24 hours before you put the food into the

freezer.

( 2 )

Alarm/

Filter

Reset

(3sec)

The Alarm button serves two purposes:

- To turn the door open alarm on and o

- To reset the water ﬁlter life indicator.

1) Door Alarm Function

If the door alarm is set to On, an alarm

beeps if any refrigerator door is left open

for more than three minutes. The beeping

stops when you close the door. The door

alarm function is pre-set to On in the

factory. You can turn it o by pressing and

then releasing the Alarm button. You can

turn it back on in the same fashion. The

icon lights up when the function is on.

When the Door Alarm function is on and

the alarm sound is triggered, the Door

Alarm Icon will blink while the alarm

sounds.

2) Water Filter Life Indicator Function

After you replace the water ﬁlter, touch

and hold this button for 3 seconds to

reset the water ﬁlter life indicator. When

you reset the water ﬁlter life indicator,

the Filter icon on the panel turns O. The

Filter icon will turn red to let you know it

is time to change the water ﬁlter after six

months (about 300 gallons). Some areas

have large amounts of lime in their water,

which causes the water ﬁlter to clog more

quickly. If this is the case in your area,

you will have to change the ﬁlter more

frequently than every six months.

( 3 )

Energy

Saver

Touching this button turns Energy Saver

mode on and o. When you turn Energy

Saver on, the Energy Saver icon lights.

Turn Energy Saver o and the icon goes

o. The Energy Saver function’s factory

setting is “ON”. If condensation or water

drops appear on the doors, turn the

Energy Saver mode o.

DA68-02601G-00.indb 18 2014. 12. 4. �� 3:05

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 115 116

Comments to this Manuals

No comments