Samsung RF25HMEDBSR User Manual download pdf (Page 29)

English - 29

02 OPERATING

• Tilt up the front of the drawer and pull straight

towards you. Then, move the drawer slightly

in the direction of the arrow in the illustration

below, and then pull out.

To re-install

• Insert the drawer into the frame rails and push

back into place.

• Slide the bin in above the desired location and

push down until it stops.

CAUTION

The drawers need to be removed before the glass

shelf above them can be lifted out.

4. Flex Zone

To remove the Flex Zone – Pull the Flex door

out to full extension. Lift the Flex Zone up, pulling

it to your body with both hands.

To re-install the Flex Zone – Open the Flex door

to full extension. Tilt the front of the Flex Zone up,

place the back of the Flex Zone onto the rails, and

then lower the front until the whole Zone rests on

the rails.

If the Flex Zone or LED lighting is not

working, check the connectors [ ( 1 ), ( 2 )

shown below ] for cracks or leaks.

1. Refer to page 12 for disassembly instructions.

2. Open the cap cover rail with a ﬂat-blade

screwdriver.

Using the doors

Ensure that the doors close all the way and are

securely sealed.

When the refrigerator door is only partially open, it

will automatically close. If the door is opened more

than its auto close range, it will remain open. You

must close it manually.

DA68-02601G-00.indb 29 2014. 12. 4. �� 3:06

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 115 116

No comments

Samsung RF25HMEDBSR User Manual Page 29