Samsung SL-M4580FX User Manual Page 297

  • Download
  • Add to my manuals
  • Print
  • Page
    / 383
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 296
Network Settings
298
2. Advanced Features for Settings Menu
DNS Configuration: You can configure the DNS server.
-Host Name: Enter the host name. You can enter up to 63 characters.
Default name is “SEC[MAC address]”.
-Domain Name: Enter the domain name. You can enter up to 128
characters.
-Primary DNS Server: Enter the address of the DNS server you want to use
primarily.
-Secondary DNS Server: Enter the address of the DNS server you want to
use as an alternative.
-Dynamic DNS Registration: If you want to use, check the checkbox(es) of
dynamic DNS registration. If this option is checked, the machine
registers its host name and domain name to configured DNS servers
dynamically. Also, if this option is checked and DHCP is selected, DHCP
FQDN options are automatically disabled.
WINS: You can configure the WINS server. WINS is used in the Windows
operating system. Select this option.
Display IP Address: You can set the machine to display the IP address on
the Notification Bar. If you select this option the IP address will show on the
Notification Bar.
TCP/IPv6
You can set the IPv6 settings.
Protocol: Tap to use IPv6 protocol in the system. Reboot the machine to
apply the change.
IPv6 Address: Shows the IPv6 address types.
-Link-local Address: This is an IPv6 address starting with a prefix value FE80.
This address has local link scope and is automatically generated.
-Stateless Address: This is an IPv6 address which is formed by router
advertised prefix and interface identifier. On a interface like Ethernet,
interface identifier is usually derived from the Mac address of the
machine. The advertised prefix depends on the router configurations.
More than one address may be configured for the router advertisement, but
only one will be displayed in the display screen.
-Stateful Address: This is an IPv6 address which is acquired by a DHCPv6
server.
-Manual Address: This is an IPv6 address which an administrator can
configure manually.
DHCPv6 Configuration: Select the DHCPv6 configuration you want to us.
-Use DHCP as directed by a router: DHCPv6 is enabled when a router
advertises to use DHCPv6.
-Always Enable DHCP: Regardless of router advertisement, use DHCPv6 to
acquire an IPv6 address.
Page view 296
1 2 ... 292 293 294 295 296 297 298 299 300 301 302 ... 382 383

Comments to this Manuals

No comments