Samsung SL-M4580FX User Manual Page 305

  • Download
  • Add to my manuals
  • Print
  • Page
    / 383
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 304
306
3. Network Setup
Network settings (configuring TCP/IP)
When you connect your machine to a network, you must first configure the TCP/
IP settings for the machine. The settings shown below are the basic settings
required for using your machine as a network machine. You can set TCP/IP, DNS
server, TCP/IPv6, Ethernet, and IP address allocation methods.
1
Ethernet
You can set ethernet settings.
Tap Settings > Network Settings > Ethernet from the home screen or Apps.
You can also use this feature from the SyncThru™ Web Service. Open the
Web browser from your networked computer and type the IP address of
your machine (see "Settings tab" on page 162).
Ethernet Port: You can enable/disable ethernet port.
Ethernet Speed: Choose the speed rate of ethernet.
MAC Address: Shows the Mac address of the machine.
2
TCP/IP Protocol
You can set IPv4 settings.
Tap Settings > Network Settings > Ethernet > TCP/IPv4 from the home
screen or Apps.
You can also use this feature from the SyncThru™ Web Service. Open the
Web browser from your networked computer and type the IP address of
your machine (see "Settings tab" on page 162).
IP Setting
You can choose the method for allocating IP addresses.
Static: Select to enter IP address/Subnet Mask/ Gateway Address manually.
BOOTP: IP address/Subnet Mask/ Gateway Address are automatically
allocated by the BOOTP Server.
DHCP: IP address/Subnet Mask/ Gateway Address are automatically
allocated by the DHCP Server.
DNS Configuration
You can configure the DNS server.
Host Name: Enter the host name. You can enter up to 63 characters. Default
name is “SEC[MAC address]”.
Domain Name: Enter the domain name. You can enter up to 128 characters.
Page view 304
1 2 ... 300 301 302 303 304 305 306 307 308 309 310 ... 382 383

Comments to this Manuals

No comments