Samsung RF23HTEDBSR User Manual Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
English - 29
OPERATING
(7) Water
Touch this button to dispense water.
This mode can not be used with the Ice
Type mode simultaneously.
Water mode shuts o when you touch the
Cubed/Crushed Ice button.
(8) Filter
Water filter usage
This icon lights up when you need
to change the filter, usually after the
refrigerator has dispensed about 300
gallons of water (after about 6 months).
The icon will blink red for several seconds
when you open or close the door.
After you install the new water filter, reset
the filter indicator by touching and holding
the Hold 3sec for Filter Reset button for 3
seconds.
- If water is not dispensing or dispensing
slowly, you need to replace the water
filter because the water filter is clogged.
- Some areas have large amounts of lime
in their water, which causes the water
filter to clog more quickly.
(9) Ice Type
Touch this button to select your desired
ice type.
Cubed and crushed ice modes alternate
when you press the button.
This mode can not be used with the Water
mode simultaneously.
To save electricity, the Panel Display turns o
automatically under the following conditions: When
no button has been pressed, when no doors
are open, or when no Dispenser Lever has been
pushed. However, the icon indicating your cubed
or crushed ice selection, will stay on.
When you press a button, open a door, or push
a Dispenser Lever, the Panel Display will turn on
again.
Except for the Energy Saver, Water, and Cubed/
Crushed Ice buttons, all function buttons will
become operational after you remove your finger
from the button you are currently pressing.
(10) Ice Maker O
Touch this button to dispense water.
This mode can not be used with the Ice
Type mode simultaneously.
Water mode shuts o when you touch the
Cubed/Crushed Ice button.
We recommend you stop ice
making if the following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
- Water is not being supplied to the
refrigerator.
If the ice maker function is ON, and
the water line is not connected,
there will be a water valve noise
from the back of the unit.
If this occurs, press the Ice Maker
O (Control Lock(3sec)) button for
less than 3 seconds until the Ice O
Indicator ( ) illuminates.
Cooling O Mode
Cooling O mode (also called Shop
mode), is designed for use by retailers
when they are displaying refrigerators on
the shop floor. In Cooling O mode, the
refrigerator’s fan motor and lights work
normally, but the compressors do not run,
and the refrigerator and freezer do not get
cold. To start Cooling O mode, touch
and hold the Freezer button, the Fridge
button and the Alarm button for 5 seconds
during normal operation. The refrigerator
chime sounds and the temperature display
flashes OFF.
To cancel Cooling O mode, touch and
hold the Freezer button, the Fridge button
and the Alarm button again for 5 seconds.
DA68-02954C (EN)-04.indd 29 15. 5. 26. �� 9:30
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

Comments to this Manuals

No comments