Samsung A727 - SGH Cell Phone 28 MB User Manual download pdf (Page 55)

CAPTURING DATA

CellDEK® User Manual 55

the phone/handset to accept the connection. If the

4-digit code is incorrectly entered you cannot

access any data from the device. Data can only be

extracted covertly over Bluetooth if the device

is PAIRED FIRST, before returning it to the target

owner. The data could then be extracted remotely

without the target owner’s knowledge (depending

on phone type).

Cell Phone Connection

1. Set the target device to Bluetooth mode. If the

device is a recognized cell phone, CellDEK will

display instructions to set it to Bluetooth mode.

2. Select “Bluetooth” from the Connectivity Option

Screen and tap the “Run Extraction” button. A

prompt will appear asking the User to “Tap

Discover Devices to Begin”.

Figure 42 – Discover Device List Screen

3. Once the target device has Bluetooth enabled,

tap the “Discover Devices” button.

4. A Bluetooth Activity screen will appear as

CellDEK searches for Bluetooth devices.

5. After 20-30 seconds, CellDEK will display a list

of found devices. Select the name of the target

device and tap the Select button.

NOTE: If the target device does not appear in

the list, tap the “Discover Devices” button again.

It may take more than one attempt to access the

device.

6. Once connected, the Target device will prompt

the user to allow connection. When requested,

enter the 4-digit code as 1234 on the target

device. Once the pairing process is complete,

data extraction will commence automatically.

NOTE: The target device screen must be

monitored during this stage of the process.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 213 214

No comments

Samsung A727 - SGH Cell Phone 28 MB User Manual Page 55