Samsung WF1802WFVS/YLE User Manual download pdf (Page 37)

100

101

troubleshooting and information codes _37

05 CyCle Chart



When your washing machine malfunctions, you may see an information code on the display. If that

happens, check this table and try the suggested solution before calling Customer Service.

CODE SYMBOL SOLUTION

• Make sure the door is ﬁrmly closed.

• Make sure that laundry is not caught in the door.

• Make sure the source water tap is turned on.

• Check the water pressure.

• Clean the debris ﬁlter.

• Make sure the drainage hose is installed correctly.

• The laundry load is unbalanced. Redistribute the load. If only one item

of clothing needs washing, such as a bathrobe or pair of denim, the

ﬁnal spin result might be unsatisfactory and an “UE” error message

will be shown in the display window.

cE/3E

• Call the after-sales service.

Sud

• This occurs when too much foaming is detected. It is also displayed

while foaming is removed. When the removal is ﬁnished, the normal

cycle proceeds.(This is one of the normal operations. It is an error for

preventing non-sensing faults.)

• If the voltage of the supplied power is instable, the washing machine

will be paused to protect its electric devices.

• If the correct voltage is supplied, the cycle will resume automatically.

For any codes not listed above, or if the suggested solution doesn’t ﬁx the problem, call your Samsung

Service Centre or local Samsung dealer.

calibrating your washing

machine



Samsung washing machine detects the laundry weight automatically. For more accurate weight detection,

please run Calibration Mode after the installation. Calibration mode is done by following the steps below.

1. Remove laundry or any contents in the machine and turn off the machine.

2. Press the Temp button and Delay End button simultaneously, and press the Power button

in addition. Then the machine turns on.

3. Press the Start button to activate “Calibration Mode”.

4. The drum rotates clockwise and counterclockwise approximately for 3 minutes.

5. When “Calibration Mode” is ﬁnished, “End(En)” appears on the display, and the machine

automatically turns off. The washing machine is now ready for use.

WF1802WF-03061D-04_EN.indd 37 2013-7-20 10:03:07

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 659 660

Comments to this Manuals

No comments

Samsung WF1802WFVS/YLE User Manual Page 37

Comments to this Manuals

Related products and manuals for Washing machines Samsung WF1802WFVS/YLE