Samsung A727 - SGH Cell Phone 28 MB User Manual download pdf (Page 52)

CAPTURING DATA

CellDEK® User Manual 52

Cable Connection

1. Select “Cable” from the Connectivity Option

Screen. CellDEK will access the Cable

Adapters that are stored in the case lid.

2. Tap the “Run Extraction” button.

3. CellDEK will illuminate the correct data cable

with a green light. A prompt will appear on the

screen asking the user to attach the cable to

the Phone Cable Jack.

NOTE: DO NOT attach the cell phone until

prompted by CellDEK.

4. Remove the cable from the rack and insert it

into the Phone Cable Jack. The cable’s LED

will turn red. Tap “OK” on the screen.

5. The cable’s LED will turn green and a new

prompt will appear. Attach the target cell phone

at this time. Tap the “OK” button once the

phone is connected.

Figure 37 – Data Cable Connected to Device

On completion of data extraction, the data cable

must be replaced into any of the forty storage

sockets. It does not matter which socket the cable

is attached to.

Unlocking a Blackberry Device

The CellDEK allows the user to input the PIN lock

for a Blackberry device directly through the CellDEK

interface rather than the device itself. The CellDEK

will automatically detect if a PIN lock is enabled and

bring up the Enter Password Prompt.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 213 214

No comments

Samsung A727 - SGH Cell Phone 28 MB User Manual Page 52