Samsung YP-P10 User Manual Page 371

  • Download
  • Add to my manuals
  • Print
  • Page
    / 596
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 370
USB DEVICE S3C2440A RISC MICROPROCESSOR
13-16
END POINT OUT CONTROL STATUS REGISTER (OUT_CSR1_REG/OUT_CSR2_REG) (Continued)
Register Address R/W Description Reset Value
OUT_CSR2_REG 0x52000194(L)
0x52000197(B)
R/W
(byte)
End point out control status register2 0x00
OUT_CSR2_REG Bit MCU USB Description Initial State
AUTO_CLR [7] R/W R If the MCU is set, whenever the MCU reads
data from the OUT FIFO, OUT_PKT_RDY will
automatically be cleared by the logic without
any intervention from the MCU.
0
ISO [6] R/W R Determine endpoint transfer type.
0: Configures endpoint to Bulk mode.
1: Reserved.
0
OUT_DMA_INT_MASK [5] R/W R Determine whether the interrupt should be
issued or not.
OUT_PKT_RDY condition happens. This is
only useful for DMA mode
0 = Interrupt Enable 1 = Interrupt Disable
0
Page view 370
1 2 ... 366 367 368 369 370 371 372 373 374 375 376 ... 595 596

Comments to this Manuals

No comments